waterproof smd 5050 pixel rgb led bulb DC 12V for KTV , bar , amusements ect
USD $0.8 - $1.2 /Piece
Min.Order:20 Pieces
12V Waterproof LED pixel light with software programmable----- 26mm&waterproof"
high brightness LED pixel light outdoor sign light DC 12V waterproof for ktv,bar,amusement ect
Arduino-compatible LED Dot Matrix For Outdoor Advertising Screen Display
Arduino-compatible Pixel LED For Outdoor Advertising Screen Display
5050 waterproof 3 leds magical led bulb DC 12V arduino compatible
P66 DC12V rgb led pixel light string(outdoor led signboard)
26mm LED Video Point Light
1.DC12V.0.72W/pcs
2.UCS1903 IC chip
3.Waterproof IP66
4.20pcs/string
Features:
RGB Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a 'dot' of silicone.
The dots are waterproof and rugged.
There are four flanges molded in so that you can 'push' them
into a 26mm drill hole in any material up to 1.5mm/0.06" thick
They're typically used to make outdoor signs. Compared to our other LED dots
The pixels are connected by a 3-conductor cable. Blue is +12V, Yellow is Ground, Green is Data
Data is shifted down from one pixel to the next so that you can easily
connect to the strand or attach more onto the end.
the datesheet
Applications:
Cove and cornice lighting
Channel lighting
POP advertising
Backlight or edge-light for signage
Stair and contour marking
Mood and effect lighting
Counter, bars, and reception desks lighting
LED Display
Project video: 1. /watch?v=hneOc43mMrA
2. /watch?v=GSbrHL_ULtE
LEDs Advantage:
1. Green lighting,with CE&RoHS,DC5V input,50pcs per strand or as customer requirement
2. Energy saving, saving 50% ,0.3W,8cm distance between each LEDs
3. WS2801 IC,256 gray leval with more pixel flash and animations.
LEDs Attention:
Part 1 LED is 50pcs per string.8cm wire between each LED,punching diameter is 12mm
Part 2 Installation to avoid the risk of electric shock.
Part 3 LED lamp,if any, when deformed or damaged,replace.
Part 4 This LED has different IC model,please notice different IC different wire define
Part 5 LED input voltage is DC5V,used the sd-card controller normally,DMX compatiable.
Part 6 It is not suitable for use in the climax of the environment in the high humidity
the images
the other images
the connection of SD controller in work
DMX512 Artnet controller working photos
the packing