Specifications

1 dmx 512 led pixel
2 epistar
3 factory direct price
4 Matrix ,artnet ,arduino compatible
5 2 years warranty

P66 DC12V  rgb led pixel light string(outdoor led signboard)

 

26mm LED Video Point Light 
1.DC12V.0.72W/pcs 
2.UCS1903 IC chip 
3.Waterproof IP66 
4.20pcs/string

Features:

 

RGB Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a 'dot' of silicone. 
The dots are waterproof and rugged. 
There are four flanges molded in so that you can 'push' them
into a 26mm drill hole in any material up to 1.5mm/0.06" thick
They're typically used to make outdoor signs. Compared to our other  LED dots 
The pixels are connected by a 3-conductor cable. Blue is +12V, Yellow is Ground, Green is Data 
Data is shifted down from one pixel to the next so that you can easily 
connect to  the strand or attach more onto the end.

 

the  datesheet

 

Model NO.	SJ-219
IC chip	UCS1903
Power Consumption	0.72W
Work Voltage	DC 12V
Beam Angle	≥120
LED Quantity	3 smd  5050 led
Color	Full color (ICRGB)
shape	round
Waterproof Grade	IP66
Work Temperature	-40-+60°C
Life-span	50,000H
Certificate	CE&RoHS
Warranty	2 years

 

Applications:

 

Cove and cornice lighting

Channel lighting

POP advertising

Backlight or edge-light for signage

Stair and contour marking

Mood and effect lighting

Counter, bars, and reception desks lighting

LED Display

Project video:  1.  /watch?v=hneOc43mMrA

2.  /watch?v=GSbrHL_ULtE

 

LEDs Advantage:

 

1. Green lighting,with CE&RoHS,DC5V input,20pcs per strand or as customer requirement

2. Energy saving, saving 50% ,0.72W,8cm distance between each LEDs

3. UCS1903IC,256 gray leval with more pixel flash and animations.

 

LEDs Attention: 

 

 Part 1   LED is 50pcs per string.8cm wire between each LED,punching diameter is 12mm

 Part 2   Installation to avoid the risk of electric shock.

 Part 3   LED lamp,if any, when deformed or damaged,replace.

 Part 4   This LED has different IC model,please notice different IC different wire define
 Part 5   LED input voltage is DC5V,used the sd-card controller normally,DMX compatiable.
 Part 6   It is not suitable for use in the climax of the environment in the high humidity

 

 

the  images  

 

 

 

 

 

 

 

the  other  images 

 

 

 

 

 

 

the project    

 

 

  

 

 

the  packing