Specifications

RGB led pixel ws2801 waterproof
1.DC5V,60mA,0.3W
2.1pcs stawhat in each pixel
3.max50 pcs/string

RGB led pixel ws2801 waterproof        

 

SD card controller or DMX512 controllable &compatible with Madrix

Working voltage:DC5V                         

Working current:60ma                         

Working consumption:0.3W                          
Working temperature:40°C- 60          

IP grade:IP66                           

Dimension:25*18.5*22mm            

LED type:1pcs  stawhat              

LED qty:1pcs
Lifespan:MTBF>50000h             

Viewing angle:>90 

 

Pixel led module are digitally-controllable lights you can set to any color, or animate

Each RGB LED and controller chip is molded into a 'dot' of silicone

The dots are waterproof and rugged

There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick

They are typically used to make outdoor signs. Compared to our other 20mm LED dots 

these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer

The pixels are connected by a 4-conductor cable. Red is +5V, Gray is Ground, Green is Data and Blue is Clock

Data is shifted down from one pixel to the next so that you can easily 

cut the strand or attach more onto the end

Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15-bit color for 32,768 different shades). The pixels must be clocked by a microcontroller

The pixels use 8mm diffused RGB LEDs

with brightness of about 300 mcd per individual r/g/b LED. 

 

SD card controller or DMX512 controllable &compatible with Madrix

Programable by Software
Individually Control
Conformal Coating,PVC glue protection
IP66, Water-proof protection
Easy installation (punching 12mm hole on metal panel)
Maximum 50pcs per set

 

Applications

  

Meets the general lighting
environment such as:
Outdoor advertising
christmas decoration