Main features of medium frequency induction melting furnace:
1.MF induction melting furnace can be used for the melting metals like gold, silver,iron, steel, stainless steel, brass, copper, aluminum, etc.
2.VS the SCR medium frequency induction furnace, it will save energy at least 20% and up.
3.Strong stirring action in the crucible during the melting process, ease the floating of the flux and oxides and electromagnetic homogeneity to produce high quality casting parts.
4.With wide frequency range 1 to 20KHz, frequency can be designed by changing the compensating capacitor and coil according to the metal material, capacity, stirring effect desire, operate noise, melting efficiency, electromagnetic homogeneity and other factors.
5.Small induction melting furnace can be melting different metals from several kilograms to 500kg.
6.24hours continuous melting without any problem.
7.Easy to change induction melting furnace for different pouring way, different melting capacity, different metal material.

Danger:
1.The output voltage of medium frequency induction heating generator is 70-550V, high voltage exist on the output connector of the generator and the connector of the compensating capacitor, and especially exists on the induction coil and the connecting cable between generator, capacitor and induction heating coil, so it is very important to insulate all these high voltage connector and parts for the safety of the operator.
2.Whenever poor insulation of the induction coil and connecting cables is found, the working must be stopped until good insulation is reformed.
3.For the safety of the operator, it is suggested that the insulating clothes, gloves and boots be worn.
4.The operating table must be made using insulating material.
5.Any change of the connecting the machine, can only be done when the power is off for the safety of the operator.
6.Repair and maintenance of the induction machine can only be done by trained personal.
7.When the induction heating machine is working, do not touch the induction coil and any components inside the machine.

The composing of medium frequency induction melting furnace:

1. Medium frequency induction heating power supply

2. Melting furnace

3. Compensation capacitor

4. accessories.

Features:

1. Installation and operation can be very easily learned;

2. Portable and light weight;   occupies less than 1.0 square meters;

3. 24hours no-stop melting ability;

4. High efficiency, Energy saving and environmental protection;

5. It's easy to change furnace to melt different materials.

Characteristics of melting by medium frequency machine:

1. better heating penetration and even temperature inside the melting metal.

2. medium frequency filed force can stir the melting pool to achieve better melting quality.

Melting the maximum quantity by the recommended machine according to above data, the first melting when the furnace is cold, and it will take 20minutes for the preheating, when the furnace is already hot,  the melting time is about 20-30minutes per furnace. 

Main models and recommend applications:

Yuelon is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction 

heating equipment and systems. our company was established in 1998 and is privately held. Precision 

induction heating solutions are our specialty. Use induction heating to improve the efficiency and 

effectivenesfor industrial heating process. That are used for application such as brazing. annealing,hardening,

forging, melting, shrink fitting etc.

Our induction heating machine are Available from 3kw to 1500kw deliverable output power with 0.5KHZ to1.1M

HZ operating frequency range. All our products are divided into four major series according to the frequency:

Medium frequency series (abbr. MF series):0.2-20KHZ

High frequency series (abbr. HF series):30-100KHZ

Superaudio frequency series (abbr. SF series):5-40KHZ

Ultrahigh frequency series (abbr. UF series):100-1100KHZ