TECHNICAL SPECIFICATIONS:

Input

4 to 20mA output from Oxygen / Toxic / Combustible Gas Transmitters

Range

0 to 999 programmable by user, reads % L.E.L., P.P.M. OR % VOL.

Resolution

0.1/ 1 programmable by user

Accuracy

±1 % of the full scale value

No. of Input cards

Max. 16 module cards (Optional available 24 nos. and 48 nos. depends upon panel size )

Display

3 Digits of 8mm (H) Red LED display for Gas Concentration

LED Indication

5 No, AL1for Relay-1 & AL2 for Relay-2, FLT for Fault Indication, PWR for Power, INT for Service / Inhibit mode, Optional TX for Transmitting signal & RX for Receiving signal

Set point

2 Independent Alarm set point programmable by user

Relay Output

3 NO, 1 NO/C/NC relay contact rated 230VAC / 5A for Alarm Relay-1 & Alarm Relay-2 and Fault relay

Relay Latching

Programmable latch facility for Alarm Relay-1 & Alarm Relay-2 Indication

Setting

Setting by 4 keys on front panel 'MODE', 'SHIFT', 'INC', 'ENT / ACK'

Monitoring

Sensor Break / Open shows 'oPEn', Under range shows 'Undr' & Over range shows 'ouEr'

Supply Voltage

18 to 36 VDC, 24 VDC normal for module card OR 230V AC± 10% for wall mounted panel

Cable

1.5 sq. mm 3 Core OR 2 Core, Flexible OR Armored shielded cable from Gas transmitter

Operating Temperature

0 to 50°C ± 5%, Relative Humidity: Below 95% non Condensing

Cabinet Material

Aluminum housing with powder coating

Terminal

20 connectors with 1.5 Sq. mm. Wire connection facility for each channel

Mounting

Panel mounting / Wall mounting

Dimensions

Cutout & Weight

No. Of Channels

Dimension in mm (Approx)

Cutout Size in mm (Approx)

Weight in Kg

( W )

(H)

(D)

(W)

(H)

(Approx)

2 Channel Rack

118

134

200

63

134

1.0

4 Channel Rack

157

134

200

113

134

2.5

8 Channel Rack

260

134

200

215

134

4.0

16 Channel Rack

484

134

200

439

134

7.5

Complete Panel

575

357

425

N.A

N.A

15.0

Optional

a) Isolated RS-485 Serial port with MODBUS RTU Protocol output for PC interface

b) Isolated 4-20mA retransmission output for PLC, DCS, any recorder

c) SMARTLOG / SCADA SOFTWARE for online graph & data report for safety Audit or real time graph, history data, alarm report

d) Flame Proof or Non Flame Proof Industrial Hooter, Hooter cum Flasher, Chart recorder, Cables, PC Software, Gas Transmitters, 24 VDC power supply, Gas calibration kit