Name: Intermediate frequency Induction Melting Furnace For Smelt waste iron/ pig iron /steel
Brand: Yongda
Availability: InStock

Product Details

Energy saving induction melting furnace, electric smelting furnace for copper/platinum/iron/steel/aluminum

Product features

1. Fast heating, heating wide

2. Protection all

3. Safe and reliable

4. High efficiency

5. Warming up quickly

6. Small size, light weight

7. Eliminate high pressure

8. Frequency bandwidth

9.Unique cooling circulation system,24 hours continous working

Super audio frequency induction heating equipment WZP Series

Model	Input voltage	Input current	Oscillation frequency	Cooling water pressure
WZP-40	320-420V	2-40A	15-30KHZ	0.1MPA
WZP-60	320-420V	3-60A	15-30KHZ	0.2MPA
WZP-90	320-420V	4-90A	15-30KHZ	0.3MPA
WZP-120	320-420V	6-120A	15-30KHZ	0.3MPA
WZP-160	320-420V	6-160A	15-30KHZ	0.3MPA
WZP-200	320-420V	6-200A	15-30KHZ	0.3MPA
WZP-300	320-420V	6-300A	15-30KHZ	0.3MPA
WZP-400	320-420V	6-400A	8-15KHZ	0.3MPA
WZP-500	320-420V	6-500A	8-15KHZ	0.3MPA

Model	Input voltage	Input current	Input power	Oscillation frequency	Cooling water pressure
WGH-IV-16	Single phase 220V	2-35A	3-16KW	15-50KHZ	0.1MPA
WZP-40	320-420V	2-40A	3-25KW	15-30KHZ	0.1MPA
WZP-60	320-420V	3-60A	3-35KW	15-30KHZ	0.2MPA
WZP-90	320-420V	4-90A	3-50KW	15-30KHZ	0.3MPA
WZP-120	320-420V	6-120A	3-65KW	15-30KHZ	0.3MPA

Packaging:

1. Packaged in fumigation-free wooden cases with anti-moisture/dust film and

2. anti-shock foam inside and steel belts and rivets outside for fastening.

3. The stand of the case can bear weight twice of that of the machine.

Delivery:

1. 7-15 days after payment by sea/air/Express (such as DHL)

2. Reliable long-term freight forwarders are chosen for safety and speed.

After-sales Service:

1. One year warranty;

2. Long-term technical service;

3. Overseas on-site technicians service if required.

In the form of induction coil

Square steel,pipe
Billet material: Steel 45, 40Cr
Size: 20*20-150*150
Temperature:1100-1200 degree celsius
Heating power:100kw-1000kw
Working frequency:200Hz-8000Hz

Round steel rods
Billet material: Steel 45, 40Cr
Size: diameter 20*20-dia.200mm
Temperature:1100-1200 degree celsius
Heating power:100kw-2000kw
Working frequency:200Hz-8000Hz

Billet material: Steel 45, 40Cr
Billet shape: Rail, forks, rigging and other shaped pieces
Temperature:900-1150 degree celsius
Heating power:100kw-800kw
Working frequency:500Hz-8000Hz

Product introduction

Model	WZP-120
Work power:	3 phase 380V+/-10%, 50-60HZ
Input voltage:	320V-420V can be changed, depend on your country's electric power
Input current:	6-120A
Oscillation frequency:	15-30khz
Cooling water pressure	0.3 MPA
Size of generator:	665400830mm
Size of transformer	660490435mm
Weight of generator	48kgs
Weight of transformer	66kgs

Advantages of our induction heating machine

One: The workpieces could be heated both partly and intergral

Two: The inductors produced according to your special workpieces

Three: The German technology IGBT adopted by our own factory

Four: Multi-Function, the workpieces could be Quenching/ Hardening/ Forging/ Melting/ Brazing/ Welding/ Diathermy

Five: Environment protection, no noise, electric energy saving than traditional heating equipment

Product features

Non-ferrous and ferrous metals melting

Precious metal melting, like gold, sliver, platinum,etc.

Semiconductor material melting

Specialized steel, iron, copper melting

Metal alloy melting, like aluminum alloy, zinc alloy, copper alloy,etc.

Other metal melting applications.

Product Description

Medium Frequency Induction Melting Furnace Features:

(1) a good high energy-saving effect melting efficiency, compact structure, strong overload

(2) around the furnace temperature is low, less smoke, good working environment.

(3) operating process is simple, smelting and reliable operation.

(4) the metal component evenly.

(5) melting fast heating, temperature easy to control, high production efficiency.

(6) furnace utilization, easy to replace varieties.

(7) an arcuate length, and a yoke magnetic shield to reduce the external leakage reluctance, the magnetic shield has a leakage across the coil, the yoke section is a curved inner side close to the outer wall seamlessly increase the effective magnetic permeability of the area of the lower ring to obtain a better support. Unique positive and negative spin coil greatly improves the efficiency of the system

Saving Features:

Heating speed, high production efficiency, less carbon oxide removal, saving material costs, extend tool life.

Because of the principle of induction heating of electromagnetic induction, the heat generated within the workpiece itself, ordinary workers with intermediate frequency electric furnace to work after ten minutes of continuous work forging tasks, without burning stove burning stove professional workers in advance and sealed furnace work . As the heating temperature fast, so very little oxidation, oxidation frequency heating forging burning only 0.5%, gas furnace heating oxidation loss of 2%, 3% of coal-fired furnace, intermediate frequency heating technology and materials, each ton forgings and burning stove saves at least compared to 20-50 kg of steel materials. Its material utilization up to 95%. Since the heating uniform heating, the temperature difference between the minimum core table, so in terms of forging also greatly increases the life of forging dies, forging surface roughness is less than 50um saving technology, frequency heating oil heating proportion of 31.5% ~ 54.3% energy saving, gas heating energy than 5% to 40%. Good heating quality, reduce scrap 1.5%, increase productivity by 10% to 30%, extend tool life by 10% to 15%.

Environmental Features:

Working environment is superior, to improve the working environment of workers and the company's image, no pollution, low energyInduction furnace and stove,, workers will no longer be compared to the hot sun baked and smoked coal stove, but can reach the targets environmental protection departments, while the external image of the company and establish a future with the forging industry trends. Induction heating is the most energy-efficient electric furnace heating from room temperature to 1100 ℃ power consumption of less than 360 tons of forgings.

About us

Shenqiu Yongda High Frequency Equipment Co., Ltd. was founded in 1996, which belongs to high-tech enterprise in Henan Province,China. We are located in Shenqiu County, Zhoukou City. We professionally dedicated to Research & Development,production of high frequency induction heating machine, medium frequency induction heating equipment,supersonic frequency induction heating machine,induction forging machine, induction hardening machine, adhering to the spirit of innovation, mean while strengthening cooperation with domestic well-known universities and research institutions. We are the leader of domestic induction heating field, and got the ISO9001:2000 international quality management system certification in August, 2004. Up to now, we has 83 office in domestic ,products hot sale , and also exported to Europe,America,and Southeast Asia etc. other regions. We have international trade office in zhengzhou. East to international airport (CGO), besides, high way, high speed rail,transport is very convenient.

Company products:
Medium frequency induction heating machine IGBT and KGPS SCR
High frequency (Super audio ) induction heating machine
Induction hardening machine, induction forging machine,induction brazing machine, induction annealing furnace,
Electromagnetic induction heating equipment,Induction melting furnace ;
CNC hardening machine tool,Automatic feeding steel rods machine,
Round bar,steel pipe induction hardening and tempering equipment
Concrete pump pipe dedicated quenching machine,Hydraulic cylinder cladding equipment;
Closed cooling tower,etc.

Products applications:
Metal forging,hardening,brazing, annealing, melting,shrink fit, thermal compound,plastic machine screw cylinder heating etc. other fields.

Corporate Culture
Quality goal: Zero annual customer complaint rate
Quality policy: Scientific management, pursuing excellence, elaborate and perfect works.
Quality concept: Product quality and the future of Yongda are controlled by us.We will make every efforts let Yongda quality arrive perfection , based on strict and efficient attitude .
Service concept: Customer is in my heart. What users need, what Yongda provides.We will take real actions to solve problems for customers.
Good faith: The people who are honest will possess real friend. The enterprise that is in good faith will make long-term development.
Innovation: Innovation is the driving force for enterprise development. Without innovation there would be no rapid development for enterprises.

Contact information:

Contact: Alice Ann

Mobile :0086 183 3990 6750

Tel : 0086 371 5501 6296

Sincerely welcome customers at home and abroad to visit us and negotiation business !
Address: NO.65,Liufu town economic and technical development,Shenqiu County, Zhoukou,Henan, China