• Applications of new type electric magneitc induction heater:
  Electromagnetic induction heating equipment using the principle of electromagnetic induction,converts electrical energy into heat energy. It is widely used in injection molding machine, extrusion machine, blown film machine, drawing machine, boiler, hot water boiler and other industries.
  
  It can replace the traditional energy,has the following advantages:
  Using electromagnetic induction heating can improve energy efficiency, heating speed and temperature control accuracy, is more advantageous to the improvement of product quality, and also saving energy and reduce the cost, so more and more widely accepted and used.
  
• Different types of electric magnetic induction heater
  

  Model	Power (KW)	Current(A)	Input voltage(V)	Input frequency (Hz)
  YD-35	35	60	Three phase four wire 380V	50-60Hz
  YD-45	45	90	Three phase four wire 380V	50-60Hz
  YD-65	65	120	Three phase four wire 380V	50-60Hz
  YD-85	85	160	Three phase four wire 380V	50-60Hz
  YD-120	120	200	Three phase four wire 380V	50-60Hz

Technology: transformation process

YD Series electromagnetic induction heating system- particle machine
1. Remove the original electric lap
2. Measuring the actural size of the heating cylinder(diameter,length)and obstructions size
3. Heated object wrapped in a layer of insulation material
4. According to the equipment heating requirments around a certain amount of high temoperature wire
5. High-temperature wire and the input lines of induction heating host machine connected, to the security complete.

Features of electric magnetic induction heater
First, the heat loss is too large: the current heating method used by most companies is around the system by the resistance wire, heating both sides inside and outside the ring will heat, heat conduction inside the cylinder, while most of the heat lost to the outside air , causing a loss of energy waste.

Second, the environmental temperature increases: a lot of loss due to heat, ambient temperature, especially in summer a great impact on the production environment, on-site temperatures over 45 ° C, some companies had to lower the temperature by air-conditioning, which in turn causes energy secondary waste.

Third, life is short,  large maintenance : As a result of the resistance wire heating, the heating temperature up to about 300 ° C, under high temperature aging resistance wire easy to blow, electric lap average life of about half a year, so maintenance work relatively large.