Name: Electromagnetic induction heater for plastic extruder /injection molding machine
Brand: Yongda
Availability: InStock

Product Details

Specifications

Electromagnetic induction heater
1.30-80% energy-saving.
2.320V-420V, 3phases.
3.95% heat exchange rate
3. 0-120Amper

Electromagnetic induction heater for plastic extruder /injection molding machine

Product Description

Applications:
Electromagnetic induction heater using the principle of electromagnetic induction,converts electrical energy into heat energy. It is widely used in injection molding machine, extrusion machine, blown film machine, drawing machine, boiler, hot water boiler and other industries.

New type IGBT solid state electromagnetic induction heater

Advantages of electromagnetic induction heater applied in plastic exturder,injection molding machine etc.:
Using electromagnetic induction heating can improve energy efficiency, heating speed and temperature control accuracy, is more advantageous to the improvement of product quality, and also saving energy and reduce the cost, so more and more widely accepted and used.

Technical parameters and properties of electromagnetic induction heater for plastic extruder

1. Work power: three phase, four wires,380V
2. Working frequency: 10-30 KHZ
3. Working current: 3-120A adjustable power
4. Temperature control range:0-999 degree cels.(Can be set arbitrary)
5. Envrionment temperature: -20 to 50 degree celsius
6. Heat efficiency utilization: above 95%

Technial parameters of Yongda electromagnetic induction heater

Model	Power (KW)	Current(A)	Input voltage(V)	Input frequency (Hz)
YD-35	35	60	Three phase four wire 380V	50-60Hz
YD-45	45	90	Three phase four wire 380V	50-60Hz
YD-65	65	120	Three phase four wire 380V	50-60Hz
YD-85	85	160	Three phase four wire 380V	50-60Hz
YD-120	120	200	Three phase four wire 380V	50-60Hz

Control panel of IGBT induction heater

Equipment features :
1.High efficient: energy saving,environmental protection
2.Heating fast:The fastest heating speed is less than 1 second
3.Heating wide: can heating variety of metal workpieces(according to different shapes of work pieces, replace removable induction coils)
4.Easy installation :the machine can be used,as soon as connected the power supply, induction coils, water inlet and outlet.
Small size, light weight ,easy to use
5. Simple operation , several minutes to learn.
6. Start fast, pass water and electric power can start heating
7.Low power consumption:can save about 40% energy than tradional HF tube furnace , save degree is relation with shpes of work pieces and induction coils.
8.Good effect: Heating very uniform (by adjusting the density of induction coils, makes every parts of work piece obtain the respective needs of temperature), warming up fast, less oxidation layer, surface got good gloss after heating .
9.Full protection: has over voltage,over current,temperature is over high,lack of water, lack of phase,etc, alarm lamps indicators. can automaticly control and protection the machine itself.
10.Temperature is adjustable, by setting heating time and the infrared thermometer, to control heating temperature of work pieces.Thus control heating temperature to a technology points , Can also increase the insulation function.
11.High security, eliminating the nearly million-Volt high voltage

Packaging & Shipping

Packing electromagnetic induction heater

Two wooden cases (plywood) Inside,will be filled with plastic foam,for waterproof and shockproof.

Accessories: induction coils,foot switch and installing and operating instructions

Shipping: by sea LCL(less than container load) or by air.

Our Services

1. Reply your inquiry within 24 working hours
2. Experienced engineer instruct and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements, propose best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Competitive price ,compare with the same industry
6. Production: strict quality standard, to produce machine and induction coils.
7. Debugging machine and only good machine will be sent.
8. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
9. Provide install and technology instruction by sending drawings, email, or telephone,video.
10.If you need, will arrange one engineer to your place,instruct install machine and training operators.
11.Excess warranty period(12 months warranty), you can buy the spare parts from us with special discount price.
12.Provide long-terms technical support.

FAQ

What’s your MOQ?	Any quantity of machine will be accepted. MOQ:1 Set
Which place your factory is located?	We are located in Shenqiu County, Zhoukou city, Henan Province ,China
How far from Beijing? I think it is more closer to Shanghai	Our factory is near both and Shanghai. We have office in Zhengzhou, we can pick up you at Zhengzhou CGO airport,and then to our factory via expressway about two hours.
We need to see some more videos for production line and also pictures of your factory, water drawing and panel drawing	Well, we have many videos show our customer’s machine working scene(Various of applications: forging,hardening, brazing, shrink fitting, melting and hot coating etc. According to your work piece processing requirements,) send you the corresponding video link or send by email. 2. Yes, we can provide you factory pictures and machine water connection and control panel details.
Do you have quality certifications?	Yes, we got the ISO9001:2000 International quality management system certification in August,2001,
How do you packing the machines?	Standard export wooden cases(plywood) Usually every set machine will be used two wooden cases: one for packing induction heating generator, one for packing transformer. Inside will be filled with plastic foam for waterproof and shockproof
More questions….?	Updating…