Specifications

1)hot air flow and infrared adjust device
2)computer communications function
3)cross-flow fan cools rapidly to protect the PCB

 

ZHUOMAO ZM-R380B Hot Air & Infrared BGA Rework Station.

 

Features:

 

1.This ZM-R380B BGA Rework Station comes with hot air flow and infrared adjust device that can improve the welding effect of BGA repair.

2.The ZM-R380B BGA bottom heater is infrared heater and the top heater is hot air heater.The top and bottom heater work are independently.

3.ZM-R380B BGA Rework Station has a computer communications function, built-in PC serial port, external temperature interface with software to achieve computer control.

4.The Hot Air rework station allow imported high-precision materials (temperature sensor, PLC, heater) to control the BGA desoldering & soldering procedures precisely.

5.ZM-R380B has a cross-flow fan,can cools rapidly to protect the PCB from deformation when welding.

6.ZM-R380B bga repair use a V-groove support equipped with a flexible fixture for PCB positioning to protect the PCB.

7.This BGA machine is suitable for large thermal capacity of PCB or other high-temperature and lead-free welding requirements, all can be handled easily. 

 

ZhuoMao ZM-R380B BGA Rework Station Features:

• Choose imported high-precision materials (temperature sensor, PLC, heater) to control the BGA desoldering & soldering procedures precisely.
• Top & bottom temperature areas heat independently, And it can set up 8 rising temperature segments and 8 constant temperature segments to control. It can save 10 groups of temperature curves at one time.
• This machine can be connected to a computer to be controlled more conveniently with a built-in PC serial port and a proprietary software attached to it.
• Choose imported high-precision thermocouple to detect the top/bottom temperature precisely.
• Top & bottom heating can be controlled independently by the temperature graphs.A cross-flow fan cools rapidly to protect the PCB from deformation when welding.
• After finishing desoldering & soldering, there is an alarming. The machine is equipped with a vacuum suction pen to facilitate the removing of BGA after desoldering.

ZhuoMao ZM-R380B BGA Rework Station Specification:

 

Total power:	3250w
Top heater:	800w
Bottm heater:	2400w
Power Supply:	Single-phase 220V/230V 50/60Hz 3.2KVA
Machine Dimension:	450×380×580mm
Positioning:	V-groove for PCB positioning, Max PCB size: 300 × 315mm
Temperature control:	High-precision K Sensor thermocouple
Net weight:	25kgs

 

 

ZhuoMao ZM-R380B BGA Rework Station Package Contains:

• 1x ZhuoMao ZM-R380B BGA Rework Station
• 6x Fixtures
• 6x M6*18 Straighthandle
• 6x M5*30 Supporting screws
• 1x Data Cable
• 1x Vacuum sucker pen
• 1x Nozzle 31*31
• 1x Nozzle 38*38
• 1x Nozzle 41*41
• 1x Brush
• 1x Instruction Manual