Scotle HR460 BGA rework station has the similar function with ZM-R5860.

 

Below is the technical details for Scotle HR460

Total Power4800W

Top heater800W

Bottom heater2nd heater 1200W,3 rd IR heater 3700W

powerAC220V±10%     50/60Hz

DimensionsL800×W900×H950 mm

PositioningV-groove, PCB support can be adjusted in any direction with exernal universal fixture

Temperature controlK Type temperature Sensor and Closed loop

Temp accuracy±3°C

PCB sizeMax 500×400 mm Min 22×22 mm

BGA chip2X2-80X80mm

Minimum chip spacing0.15mm

External Temperature Sensor1,more can be added

Net weight45kg

 

Scotle HR460 main feature as below:

l  Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.

l  It uses precise K-type close circuit control and automatic temperature adjustment system, with PLC and temperature module to enable precision temperature control of ±2 deg C. External temperature sensor enables temperature monitoring and accurate analysis of real time temperature profile.

l  V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds of PCB board.

l  Flexible and convenient removable fixture on the PCB board which protect sand prevent damage to PCB. It can also adapt to rework various BGA packages.

l  Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement.

l  Three temperature areas can independently heat and are multiple controllable and adjustable to ensure best integration of different temperature areas. Heating temperature, time, angle, cooling and vacuuming can all be set on the interface.

l  There are 6-8 levels of variable and constant temperature controls. Massive storage of temperature curves which are Instant accessible according to different BGA. Curve analysis, setting and adjustment are all accessible via touch screen. Three heating areas adopts independent PID calculation to control heating process to enable more accurate and precise temperature control.

l  It uses high powered blower to enable fast cooling of PCB board and prevent it from deformation. There are also internal vacuum pump and external vacuum pen to assist with fetching the BGA chip.

l  Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, voice reminder / warning to get the workers prepared. Cooling system will start after vertical wind stopped heating. When the temperature drops to room temperature, the cooling process will stop, so that the machine will not age after heated up.

l  CE certification, with emergency switch and automatic power-off protection device when emergencyhappens.

There is also Scotle HR460C for your selection, which is added camera and CCD system.