General Description

VT-CC2500PA-M1 is based on RF transceiver CC2500 of TI Chipcon. CC2500 is a low-cost 2.4 GHz transceiver designed for very low power wireless applications. The circuit is intended for the 2400-2483.5 MHz ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band. The max RF output power can be set as high as +1dBm, with data rate as high as 500Kbps. The module integrated PA CC2591 to make the max RF output power up to +20dBm. There is an inverted F antenna on the module. So you can use the module conveniently and reducing your development time.    

Features

l  Central frequency is 2433MHz, Frequency bands: 2400~2483.5MHz

l  Programmable output power up to +20dBm, the transmission distance is above 1000m in sight .

l  High receiver sensitivity down to -109dBm(2.4Kbps)

l  Programmable baseband modulator with GFSK/2-FSK/ASK/OOK/MSK

l  Programmable data rate 1.2~500Kbps

l  Separate 64-byte transmit/receive FIFOs.

l  Built-in CRC check ensure data transmission reliably.

l  Support carrier sense indicator and digital RSSI output.

l  Low current consumption with receive mode <30mA, transmit mode at +20dBm output power <160mA

l  Low current consumption at power down state <2uA

l  Wake-on-radio functionality for automatic low-power RX polling

l  Integrated analog temperature sensor

l  Efficient SPI interface, all registers can be programmed with one “burst” transfer

l  Small dimension: 30.0mm×21.0mm×2.4 mm

l  Operating supply voltage: 2.4~3.6V DC

Applications

l  Logistics Tracking System, Warehouse patrol, Electronic label.

l  Replace RS232 and RS485 in data transmission

l  Industrial monitoring and control in data acquisition

l  AMR – Automatic Meter Reading

l  Home and building automation

l  Consumer Electronics products of wireless control

l  Wireless alarm and security systems

l  Wireless sensor networks

General Characteristics

Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.