General Description

VT-CC2530-Z1 is based on RF Transceiver CC2530 of TI Chipcon, it’s a small size and ultra low power UHF wireless module. CC2530 is a true system-on-chip (SoC) solution for IEEE 802.15.4, Zigbee and RF4CE applications. It combines RF transceiver with an industry-standard enhanced 8051 MCU , in-system programmable flash memory, 8-KB RAM and many other powerful features. Customer can use it conveniently and reducing your development time.

Features

Radio and Power

l  2.4-GHz IEEE 802.15.4 Compliant RF Transceiver

l  Excellent receiver sensitivity and robustness to

l  Interference, receiver sensitivity reach to -97dBm

l  Programmable output power up to 4.5dBm

l  Suitable for systems targeting compliance with worldwide radio-frequency : ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)

l  Accurate digital RSSI/LQI support

l  Data rate: 250kBaud

l  Modulation: O-QPSK

l  Integrated PCB antenna, other antenna are optional with an IPX connector

l  Active-Mode RX (CPU Idle): 24 mA

l  Active Mode TX at 1 dBm (CPU Idle): 29 mA

l  Power Mode 1 (4 uS Wake-Up): 0.2 mA

l  Power Mode 2 (Sleep Timer Running): 1 uA

l  Power Mode 3 (External Interrupts): 0.4 uA

l  Wide Supply-Voltage Range (2 V–3.6 V)

8051 MCU and Peripherals

l  Powerful five-channel DMA

l  128KB in-system programmable flash, customization 32-,64-,256-KB

l  8KB RAM with retention in all power modes

l  CSMA/CA hardware support

l  AES security coprocessor

l  Battery monitor and temperature sensor

l  12-Bit ADC with eight channels and configurable resolution

l  Two powerful USARTs with support for several serial protocols

l  IEEE 802.15.4 MAC timer, general-purpose timers (One 16-Bit, Two 8-Bit)

l  32-kHz sleep timer with capture

l  Watchdog timer

l  21 general-purpose I/O pins (19× 4 mA, 2×20 mA)

l  Hardware debug support

Applications

l  2.4-GHz IEEE 802.15.4 Systems

l  RF4CE Remote Control Systems (64-KB Flash and Higher)

l  ZigBee Systems (256-KB Flash)

l  Home/Building Automation

l  Lighting Systems

l  Industrial Control and Monitoring

l  Low-Power Wireless Sensor Networks

l  Consumer Electronics

l  Health Care

General Characteristics

Test operating conditions:Ta=25°C,VCC=3.3V if nothing else stated.