Name: ROSIM Wireless Vehicle Sensor Detector Traffic Counting for Smart Intersection Traffic Light Control System
Brand: ROSIM
Availability: InStock

Product Details

Project Case Study

1. Real-time Traffic Counting with LED Display Guidance

This system can be used for urban highway transportation and also used for parking lot entrance and exit to count the vehicle quantity passing over it.

2.Adaptive traffic signal controlling in the Intersection

Wireless vehicle sensor detect and transmit real-time data from all directions, Wireless Access Point is put in the traffic light controller box and get the data via antenna. All data is relayed to controller by Rs232/Ethernet/GPIO trigger output, so that the controller systems get and analyse the traffic flow data, and calculate the best traffic scheme, controlling traffic lights release time to improve transportation effiency and save drivers' time.

Connection with Traffic controller ( ATC,QTC, Hisense and client own brand)

2. Traffic flow detection system

Vehicle Detection Sensor is installed in specified road, detect every vehicle passing by, and transmit the real-time information to traffic management systems via wireless access points. The user systems can calculate the traffic flows by analysing the data.

3. Corridor management

There two vehicle detector at the entrance for detecting a coming and leaving vehicle and transmitting the information.When vehicle passed the detector will trigger the camera take a picture.

Product Description

1. It is include wireless vehicle detector and wireless access point , two parts. It can detect the traffic flow and send the data for your server.

Introduction:

WVD-130x wireless vehicle detector is designed for pursuit of high efficiency and low cost ITS traffic application systems. Based on technology of magnetic detection and uPower® wireless sensor network, WVD -130x vehicle speed sensors can be easily installed on road in few minutes without any wiring to acquire dynamic traffic flow information with no maintenance for many years.

Introduction

WAP-348x wireless access point acts as a gateway between user applications and wireless vehicle detection network formed among the WVD sensors installed on the road surface. WAP-348x manages the network and collects data from all the sensors, and on the other hand, provides data interface to user traffic systems.

Installation

The installation for WVD includes 3 steps:

1. Drill a hole of 12cm diameters/10cm height

2.Fill it with cement to 1/2

3.Embedded the WVD and finish the installation

Compare with Loop

Major Advantages

a) Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;

b) Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;

c) No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ 120/H 100 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;

d) About 10 years long life span. With high standard water proof and anti-press characteristics, WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.

e) Cost saving. You just can use the cement which is about $2 for 3-4 sensors.

f) Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost 10 minutes for the devices wireless updating;

g) Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loops, video, micro-wave etc. in the market. This appears more and more significantly to our environments;

h) Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in your system directly.

Maintain & Support

1. Rosim promise to provide customers high quality products and solution

2.All the products support wireless updating, which makes it easily maintained.

3.Rosim provides 24 hours on-line supports.

4. Rosim support the Starter Kit sales for customers.

Contact Information

If still need any further information, welcome to visit us or contact the manager Rebecca:

Welcom to visit and feel free to contact us!