liquid rubber coating
USD $13 - $15 /Liter
Min.Order:20 Liters
Jining Xunda Pipe Coating Material Co., Ltd.
liquid rubber coating
The anti corrosion adhesive systems consist of butyl based elastomers blended with polymeric resins dissolved in an organic solvent system. They can be used for machine or hand applications and provide excellent adhesion to the pipe substrate and cathodic
The liquid rubber coating shall be stored in accordance with regulations that govern hazardous material storage.
Primer inventory shall rotate on a first in - first out basis. Primer containers shall be marked with receiving date.
liquid rubber coating is applied to the pipe steel surface with a brush or paint roller to a wet thickness of no less
than two (2) mils (65 microns) and no greater than 3 mils (76 microns). The primer shall be thoroughly mixed prior to application on pipe. Primer container shall remain covered when not in use.
The primer shall cover the entire exposed steel surface including the raised circumferential weld
bead and overlap onto the mill applied primary coating system by a minimum of 4 inches (10.16
cm).
The primer shall be dry to touch prior to the application of the joint wraps.
The primer shall not be diluted. Primer cans shall remain covered when not in use to avoid
solvent evaporation and contamination.
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Offshore Industry
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
Key Advantages
17 years of pipeline coating experience
Global presence in oil, gas and water industries
Total manufacturer of Polyethylene, Polypropylene coating systems
Innovative coatings, high temperature systems and niche coatings with first quality products
Multiple coating systems to meet end-user applications and requirements
Broad range of products to meet pipeline requirements
Tailor made products to specific application on demand by the end-user
High Quality products through innovative technology, manufacturing methodologies and first quality raw materials
ISO approved manufacturing protocol
Xunda products and coating systems approved to ASTMD1000,AWWA C 214,C 209,EN 12068,DIN 30672 and other standards
Standard manufacturing methodologies
State of the art quality control/assurance procedures and protocol
Technology/R&D programs for new products and new processes
Adaptable to manufacturing specific request within short time frames
Proven long-term performance and corrosion protection on operating pipelines
Coating applied in plant and over-the-ditch
Easy of application, consistent application and lower costs
Compatible with traditional and current corrosion coatings
Technical support
Just-in-Time delivery on a global basis
Achieving and exceeding Client requirements for products, packaging and shipment expectations
Meetings all International and In-Country transportation requirements
Girth weld coating applied in Bell-hole or out of the ditch
Type of Products/ Services Offered
Anticorrosion and Mechanical Protection Tape-2ply & 3ply
Primers
Fillers
Wrapping Machines
Technical Assistance
Coatings for the joint
Special products
Tape Coating Systems
Line travel, over-the-ditch coatings and application
Can be applied with a powered wrappers
Can be used for new pipeline construction
Can be used for pipeline rehabilitation/reconditionin
Used in the oil, gas and water pipeline industry
Offshore and Refinery coatings
Functionality to a Coating System
High adhesion strength
High shear resistance and shear strength
Cathodic disbonding resistance
Dielectric strength and electrical resistance
Resistance to impact and penetration forces and stresses
Stable to thermal and hydrolytic environments
Long term performance stability
Compatible with cathodic protection
Resistant to UV radiation
Mechanical protection
Jining Xunda Pipe Coating Materials CO.,Ltd specializes in making anti-corrosive coating material for petro-chemical, Oil,Gas and Water underground, underwater and overhead pipelines transport system, are widely used for electricity, chemicals, construction.
XUNDA main corrosion protective products has: Polyethylene inner wrap tape,Polyethylene outer wrap tape, Polyethylene Joint wrap tape,Polyethylene 3 layer wrap tape,Polyethylene Onewhole Tape, Polypropylene Anti-corrosion Tape,Polypropylene waterproof tape, Aluminum Foil Anticorrosion Tape, Aluminium foil waterproof tape,PVC anti-corrosion pipe wrap tape, Heat Shrinkable Tape etc.
Xunda have got DVGW,AWWA,ASTM,SGS certificates and test report, also the sole factory in China passed DVGW,AWWA test. Xunda Manager System is IDO 9001,ISO 14001 and OHSAS 18001.XUNDA tapes can meet ASTM D 1000,DIN EN 12068, 30672,AWWA C209,214 ,IGS and other international standards.
XUNDA major market including 80 countries, widely distributed in South Asia,Southeast Asia, the Middle East, Africa, Central Asia, West Asia, North Europe, Eastern Europe, South America, Australia.
Please contact us! Then we will devote all we have to you: excellent products, excellent quality ,excellent services!