Specifications

P19: Solid content 19%;
P27: Solid content 27%.
It is recommended for use with only Xunda coating systems.
Meet ASTM D 1000

anti-corrosion liquid adhesive for pipeline

The anti corrosion adhesive systems consist of butyl based elastomers blended with polymeric resins dissolved in an organic solvent system. They can be used for machine or hand applications and provide excellent adhesion to the pipe substrate and cathodic

 

The anti-corrosion liquid adhesive for pipeline  shall be stored in accordance with regulations that govern hazardous material storage.
Primer inventory shall rotate on a first in - first out basis. Primer containers shall be marked with  receiving date.

 

anti-corrosion liquid adhesive for pipeline  is applied to the pipe steel surface with a brush or paint roller to a wet thickness of no less
than two (2) mils (65 microns) and no greater than 3 mils (76 microns). The primer shall be  thoroughly mixed prior to application on pipe. Primer container shall remain covered when not  in use.

 

The primer shall cover the entire exposed steel surface including the raised circumferential weld
bead and overlap onto the mill applied primary coating system by a minimum of 4 inches (10.16
cm).
 The primer shall be dry to touch prior to the application of the joint wraps.
The primer shall not be diluted. Primer cans shall remain covered when not in use to avoid
solvent evaporation and contamination.