Wiegand26/34 125kHz/13.56MHz Keypad RFID Access Control proximity Card Reader

Brief introduction  RFID Access Control proximity Card Reader

This is a long range keypad electric card reader. With 125khz frequency, it can allow fast recognition and reaction. Its reading distance range 3-15 cm, allow users pass through conveniently.  When the card approach the reader, the red light turn into green, after glinting to turn red color again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data.

Product Features  RFID Access Control proximity Card Reader

> WG26 ( WG34 optional )                                                                  

> Size: 88×88×18(mm)                                                              

> DC9~16V                                                              

> Working current: ≤100mA 

Product specifications  RFID Access Control proximity Card Reader

View of Product  RFID Access Control proximity Card Reader

Installation: RFID Access Control proximity Card Reader
Using “+”type screw driver to loosen the screw between the panel and motherboard. And
then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection: RFID Access Control proximity Card Reader
WG26/34                                            RS485                                                    RS232
Red: DC 9V-16V                                Red: DC 9V-16V                                     Red: DC 9V-16V
Black:GND                                         Black:GND                                              Black:GND
Green:D0                                          Green:4R+                                              Green:RX
White:D1                                           White: 4R-                                               White:TX
Blue: LED
Yellow:BEEP
gray :Door Bell
purple: Door Bell

Notice!
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of
power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the
same GND
3. The wire connects reader to controller, advise use 8 cores stranded twisted pair
cable(among them, three strands are spare, if no need reader show illegal card s by sound
and light, LED wire can not be used, data wire Data1 Data0 are twisted pair would be better,
we suggest sectional area are 0.22 square millimeter at least. The length should not exceed
100meters.

Related access control card reader:

Our Service:

Company Show:

Brief Introduction of JONEY TECHNOLOGY CO.,LTD  click to know more detail.

An High-tech enterprise that specialize in R & D, Production and Distribution of CCTV security products,Video&Audio Intercom products,access control products,etc .Through 10 years' effort ,We have established good cooperationship with customers worldwide from 150 different countries.

Main Market:

Our products have been exported to more than 150 countries worldwide.Our main markets are USA,Australia,Easter/Western Europe,Malaysia,Indonesia.

QC/Technical Support 

With 30 Quality controlling staff To check all materials and components at each stage of production. The testing devices will be turning on for over 48 hours before delivery.

To test the software, function and stability

To Check the Packing by Logo,Color/Brown Box,Carton.

We provide 18-month warranty for free maintenance and technical support forever at anytime,Please feel free to contact us if any dissatisfaction.

Welcome to visit our factory anytime , we sincerely hope to cooperate with you on the concept of with you on the concept of mutual profit and hearty service!