What is environment test? 
Expose the products in the natural surroundings or in the simulation environment, then evaluate their performance under practical environment when during storage, transportation and usage. Environment test is a vital way for quality assurance, since it can provide info about design and products quality. 

Precisely Controlled Material Testing Machine Low Temperature and Cold Test Chamber

Standards implemented and met
1.   GB11158 Technical conditions for high-temperature testing room
2.   GB10589-89 Technical conditions for low-temperature testing room
3.   GB/T10586-89 technical conditions for humidity testing room
4.   GB/T2423.1-2001 testing methods for low-temperature 
5.   GB/T2423.2-2001 testing methods for high-temperature
6.   GB/T2423.3-93 technical conditions for humidity testing room
7.   GB/T2423.4-93 testing method for alternating hot and humid
8.   IEC60068-2-1.1990 testing methods for low-temperature
9.   IEC60068-2-2.1974 testing methods for high-temperature
10.   GJB150.3 High-temperature test
11.   GJB150.4 Low-temperature test
12.   GJB150.9 muggy test
13.   GB/T2423.22 temperature test

Installation environment 
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switch gear and humidification condensate drains, and external power connector device is necessary  
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than 800kg/m2
Leave adequate space for maintenance

1. Dedicate touch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
7. Japan imported UP-10D Seamless Welding Machine, especially for copper pipe welding

  If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

  Komeg has been the brand of Komeg Technology Industrial since 1990. We manufacture environmental simulation test equipment for quality-conscious customers. Our factory is located in Dongguan, covering an area of 5,000 square meters, with over 52 employees including 26 R&D engineers.

Welcome to visit  

Besides this, we have a lot of other chamber for your reference:

3-zone/ 2-zone Thermal Shock Chamber

Walk-in Constant Temp. and Humidity Chamber

Rapid Temp. Change Chamber

Precise Drying Test Chamber

Temperature/  humidity/ vibration three integrated Chamber

Precise Drying Chamber

Vacuum oven/ no oxidation oven

Air Exchange Type Aging Oven

Burn-in Room

Salt spray Chamber

Vibration Testing Machine