CE Standard Floorstanding Temperature Humidity Test Chamber With Germany Compressor
USD $6,000 - $15,000 /Set
Min.Order:1 Set
Guangdong KOMEG Technology Ind Co., Limited
High Precise Ideal Environmental Temperature and Humidity Testing Chamber for Automotive
Professional programmable Temp. and Humidity Test Equipment for PCB Industry
Environmental Temperature Humidity Cycle Test Chamber for Photovoltaic & Solar Panel
programmable control High Precision and Reliability climatic test chamber for PCBA
programmable control climatic chamber for electrical led light stability testing
programmable control temperature humidity climatic test chamber for PCBA
Application :
An environmental chamber, also called climatic chamber or climate chamber, is an enclosure used to test the effects of specified environmental conditions on biological items, industrial products, materials, and electronic devices and components.
Such a chamber can be used:
as a stand-alone test for environmental effects on test specimens;
as preparation of test specimens for further physical tests or chemical tests;
as environmental conditions for conducting testing of specimens;
CE Standard Floorstanding Temperature Humidity Test Chamber With Germany Compressor
Technical parameter: | ||
Model | KMH-800L | |
800L chamber volume | ||
Temp. range | -40°C ~150°C | |
Display resolution | 0.1°C | |
Temperature stability | High±0.5°C ,low ±1.0°C | |
Temperature uniformity | ±2.0°C | |
Heat up time | -40°C ~+100°C,within 45 min | |
Pull down time | +20°C ~-40°C,within 60 min | |
Humidity range | 20~98%R.H,(standard), '10~98%R.H,(with humidifier) | |
Humidity constancy | ±2.5%R.H | |
Humidity uniformity | ±3.0%R.H | |
Interior Dimension(mm) | 1000W*1000H*800D | |
Exterior Dimension(mm) | 1280W*2160H*1750D | |
Interior material | Stainless Steel Plate(SUS 304) | |
Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | |
Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | |
Total power | 14KW(heater 6KW included) | |
Max current | 30.3A | |
Water Consumption | 2.2L/hr | |
Ambient Temp. | +5°C ~+35°C | |
Power Supply | AC 380V±10%50Hz ,3 phase 4 wires +Ground Wires | |
Weight | 500KG | |
Sight window size | 460*560mm | |
Sample holder | 2 pcs | |
Fittings | cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m | |
Safety device (standard) | No fuse breaker,over pressure,over heat&over current protect,over temp. protect, over load protect for blower, dry heat protect | |
Control System | Balanced Temperature & Humidity Control (BTHC)System | |
Refrigeration system | Air Cooled (Water Cooled is option) | |
Hermetic compressor | ||
Single stage refrigeration system | ||
CFC-Free refrigerant(HFC-507/HFC-23) | ||
Controller | 7-inch LCD Touch Screen panel | |
Operation model :Program or fix point running | ||
Memory capacity :120programs,1200steps, | ||
All repeat 999 cycles, part repeat 99 cycles | ||
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | ||
Standards implemented and met
1. GB11158 Technical conditions for high-temperature testing room
2. GB10589-89 Technical conditions for low-temperature testing room
3. GB/T10586-89 technical conditions for humidity testing room
4. GB/T2423.1-2001 testing methods for low-temperature
5. GB/T2423.2-2001 testing methods for high-temperature
6. GB/T2423.3-93 technical conditions for humidity testing room
7. GB/T2423.4-93 testing method for alternating hot and humid
8. IEC60068-2-1.1990 testing methods for low-temperature
9. IEC60068-2-2.1974 testing methods for high-temperature
10. GJB150.3 High-temperature test
11. GJB150.4 Low-temperature test
12. GJB150.9 muggy test
13. GB/T2423.22 temperature test
Installation environment
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switch gear and humidification condensate drains, and external power connector device is necessary
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than 800kg/m2
Leave adequate space for maintenance
1. Dedicate touch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
7. Japan imported UP-10D Seamless Welding Machine, especially for copper pipe welding
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Komeg has been the brand of Komeg Technology Industrial since 1990. We manufacture environmental simulation test equipment for quality-conscious customers. Our factory is located in Dongguan, covering an area of 5,000 square meters, with over 52 employees including 26 R&D engineers.
Welcome to visit
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. and Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Vibration Testing Machine