Specifications

The product of floor decking forming machine has strong strength with high ribs. It's best to be used as the floor of high build

1. Decking Machine Introduction:
Steel floor deck sheet is rolled by WLFM series steel floor decking  machine, the finished products are of many features, such as simple shape, large wave height, high intensity and good adhesiveness when pouring the concrete together with the welded steel wire net on-site. In the high-storey building, it not only can save steel mould board, but also reduce the bearing of the floor; on basis of equal capacity, it reduces the steel amount of engineering use, so that it saves cost of investment.
WLFM series steel floor deck roll forming machine is consisted of uncoiler and its base, infeed guides, fixed position driven forming stations, shearing device, hydraulic station, PLC control console and so on. Our company has dozens of profile models for this series roll forming machine, such as WLFM66-225-675, WLFM76-344-688, and etc. We can design different kinds of profile and fittings for downpipe machine, as per customers’ requirements.

 

2. Decking Machine Working Flow:

 

Uncoiling→Sheet Guiding→Roll Forming→Measuring Length &Shearing→Sheet to Support Table. 

 

 

 

3.Decking Machine Features:

Model		HG-195	HG-344
Material	Typle	Aluzinc	Aluzinc
	Thickness(mm)	0.6-1.0	0.8-1.2
	Yield stress(Mpa)	300-350	230-300
Max. Forming speed(m/min)		8-12
Roller material		45# steel with chrome
Roller driven type		Chain transmission
Controller		PLC
Operation		Touch screen and button
Hydraulic system pressure(Mpa)		12
Hydraulic station motor power(KW)		5.5
Main motor power(KW)		18.5 x 2	18.5
Total power(KW)		44	24
Total weight(Kg)		About 30000	About 18000