Specifications

1. Profile as per customer's request
2. Thickness:0.8-1.2mm
3.Speed: 0-12m/min
4. Controller: PLC, Mitsubishi, Japan

 

Components for the Machine

 

This floor decking machine consists of 10T hydraulic uncoiler with coil car and pressing arm, guiding equipment, encoder system, grooving embossing device, roll forming rollers & main machine body frame,post-cut equipment, hydraulic station, PLC control computer desk and run-out supporter table.

 

Technical Parameters

 

Material Spec: Q235 color coated or galvanized steel coil

(Material to be rolled): Thickness: 0.8-1.2mm; Coil width:

Inner diameter of the coil: normally is 508mm and 610

Outer diameter of the coil: no more than1800mm

Roll stands: about 33 groups (including embossing roller)

Main structure: wall style entire steel structure

Driving system: chain transmission 

Main power: main motor 22-30kw, hydraulic press 5.5kw, but depends on final design.

Voltage: 380v, 60hz, 3ph or depends.

Main reducer: cycloid pin

Cutting: hydraulic cutting

Material of blade: Cr12, heat treated HRC58-62

Measure: encoder

Controller: PLC

Forming speed: about 0-12m/min

Dimension: about 15000mm*1500mm*1450mm

Weight: about 9 Ton

Run-out Table: 2 set, one set is 2 meter in length.    

 

Material of Main Equipment

 

Roller Material    

Bearing steel with hard treatment

 

Active Shaft Material      

High grade No.45 carbon wrought steel,can improve the integrated mechanic feature of the shaft

 

Diameter of Shaft                  

95mm (Embossing roller shaft 100mm)

 

Electric Elements             

PLC control panel Transducer, PLC Controller, Touched Screen originally imported from Mitsubishiof Japan. Other element from famous suppliers in China

 

Cutter Blade                  

Cr12 mould steel with Quench Treatment