The TEST-E Series Computer controlled electro-hydraulic servo universal testing machine is the ideal choice for all your testing needs, capable of testing a wide range of flat and round specimens. The TEST-E Series UTM’s also have a controllable speed range to comply with current International standards. The WAW-E series can also carry out compression/ flexural testing on concrete cubes and beams up to 2000 kN.

Standards

• ISO6892: DIN EN 10002-1, JIS Z2241, BS-18, and ASTM E8: Metallic Material-Tensile Testing at ambient temperature
• ASTM A370: Standard Test Methods and Definitions for Mechanical Testing of Steel Products
• ASTM E4: Standard Practices for Force Verification of Testing Machines
• EN 10002-4: Tensile Testing Of Metallic Materials – Verification of Extensometers used In Uniaxial Testing
• ISO7500-1: Verification of Tension / Compression Testing Machines

Functions and Applications

Model TEST-E Series computer control electro-hydraulic servo universal testing machine is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing strength. It is simple, easy to operate and widely used in work shops, laboratories and schools for material properties research and quality control. Equipped with a PC, Software & Printer, it can display, record, process and print test results, control the selected test procedures and draws test curves automatically in real-time. The machine complies with ASTM, DIN, ISO standards.

Load Frame

• Rigid four-colum n design, with two-lead ball screws
• Dual work space design: Upper for tension, Lower for compression or bending tests
• Movable lower crosshead providing ease of operation
• Accurate force measurement through a precision load cell
• Open front h ydraulic wedge grips for easy change of inserts and specimen loading
• Integrated displacement photoelectric encoder

Safety Features

• Overload protection: When the testing load is over 2%-5% of Max. Load, the system will unload
• Stroke protection: When the ram arrives at the upper limited position, the motor will stop

Software

• The software is structured to allow the user to carry out the tests with minimum input
• Features full digital close-loop control modes, such as test load, displacement, stress and strain
• Different control modes can be switched between each easily
• Integrated test procedures, programmable steps up to 100 steps, software can also be extended to complete more complex testing procedures
• The software design aims to be easy and convenient in the testing operation. The software can also be amended to carry out multi batch testing
• Automatic data processing, processing method complies with multi international standards, such as ISO6892-1998, EN10002-1:2001 and ASTM
• International units are used as standard, such as SI, metric measurement, etc. system unit and British so the system can be used in various countries
• Manual data processing can be used to process various kinds of test data
• Test reports, can be stored, printed and re-analysed
• Test data is stored in the form of ‘text mode’, and any general commercial data processing software can used to reprocess any test data
• Features assorted test curves
• Integrated docum ent operating system , for example, test report, test parameter, system parameters can be stored in the form of ‘text mode’
• Compatible with different commercial printers
• Control system is software based, so upgrading the system is easy

Key Technical Features

• Test curves mode : Load-Deformation, Load-Time, Load -Displacement, Stress-Strain, Deformation-Time, Displacement-Time, Load-Strain
• Parameters processed with computer: Upper & lower yield point strength ReH point, break ing strength, stress, deformation, elastic modulus & 6P0.2.etc.
• Control Mode: Servo Control (Displacement, Load, Strain, Stress)

For more information visit: .uk/shop/general-equipment/test-e-series-computer-controlled-electro-hydraulic-servo-universal-testing-machine/