CRT-MSHOT-600, with maximum speed 1300 rpm, volume stirred 15 litres (based on water contained in a 20 litre flat bottom flask) and temperature 300°C. Cast aluminium/silicon alloy hotplate 160 x 160 mm, accomodating beakers up to 5 litres capacity. With digital setting and control, via a brigh, fluorescent display which also simultaneously displays set and actual temperature to 1°C and speed to 10 rpm, separate safety circuit, dial setting, stirrer ‘on’ and heater ‘on’ warning indicators (the heater lamp flashes whilst plate temperature remains above 70°C). A PTFE-coated remote temperature probe which allows control of liquid temperature ± 1°C and up to 200°C is also provided and a facility for mounting a retort rod at the rear of the case. Dimensions (W x D x H) mm: 190 x 300 x 110; Weight 3.4 Kg.

CRT-MSHOT-620 and CRT-MSHOT-620/14 have maximium speed of 1400 rpm and maximum temperature of 300°C. Hotplate diameter is 145 mm. With variable speed control, electronic temperature control, independent safety overheat circuit which operates at 50°C above set temperature, and a ceramic-coated aluminium alloy hotplate. Also feature a DIN 12878 connection for an accessory Pt100 temperature probe, which allows direct monitoring and control of sample temperature up to 300°C*, and provision for mounting a 12.5mm diameter retort rod at the rear of the case. CRT-MSHOT620/14 additionally features a digital display of speed and time and a seccondary safety overheat circuit. Dimensions (W x D x H) mm: 173 x 277 x 94; Weight 2.9 Kg.

* Note: CRT-MSHOT-620 does not have a display, therefore an additional thermometer is required to monitor temperature within the sample.

CRT-MSHOT-625 has maximum speed of 1500 rpm and maximum temperature 310°C. For stirring up to 20 litres of water. Aluminium alloy heating plate, diameter 135 mm. Digital speed and temperature setting with separate LED displays, adjustable safety over temperature circuit, error code display, ‘hot top’ indicator and DIN 12878 connection for a Pt1000 contact thermometer to monitor and control sample temperature directly. Supplied with Pt1000 probe and cable, splash protection cover for housing and facility for mounting 12.5 mm diameter retort rod at the rear of the case. Dimensions (W x D x H) mm: 160 x 270 x 85; Weight 2.5 Kg.

CRT-MSHOT-635 has maximum speed of 1700 rpm and maximum temperature 340°C. For stirring up to 20 litres of water. Stainless steel heating plate, diameter 135 mm. Digital speed and temperature setting with separate LED displays, adjustable safety overtemperature circuit, error code display, ‘hot top’ indicator and DIN 12878 connection for a Pt1000 contact thermometer to monitor and control sample temperature directly. CRT-MSHOT-635 is supplied with Pt1000 probe and cable, splash protection cover for the IP42 level housing and facility for mounting 12.5 mm diameter retort rod at the rear of the case. Dimensions (W x D x H) mm: 160 x 270 x 95; Weight 2.5 Kg.

CRT-MSHOT-705, maximum speed 2000 rpm and volume stirred 15 litres. Maximum temperature 325°C. With cast aluminium/silicon alloy top plate 150 x 150 mm, with thin ceramic coating for additional chemical resistance. Microprocessor controlled heating with safety circuit, direct temperature dial setting with back illumination which progressively lights up as the plate temperature increases to set point, and variable with ‘off’ poistion, ‘stirrer on’ and ‘heater on’ warning lamps (the heater lamp flashes when the plate temperature exceeds 50°C). With retort rod mount behind the top plate and base cut-outs to allow a retort stand base to slide under the housing. Dimensions (W x D x H) mm: 172 x 248 x 122; Weight 2.9 Kg.

Key Features

• 1500 rpm Max. Speed
• 325C temperature
• Volume stirred 15 litres
• Microprocessor speed and temperature control
• Warning indicators
• Facility for mounting a 12.5mm retort rod

For more information visit: .uk/shop/general-equipment/magnetic-stirrerhotplate/