Specifications
plastic conveyor belt1.Low elongation
2.Heat-resistant
3.Oil resistant
4.high strength tape, long service life.
plastic conveyor belt/polyester conveyor belt Specifications
(1) with the core material: CC-56, NN100, NN150, NN200, NN300, NN400
(2) bandwidth: 100mm-2200mm
(3) cloth layer :2-10-storey
(4) plastic cover: Face :1.5-8mm non-face: 0mm-4.5mm
plastic conveyor belt/polyester conveyor belt Features:
1. increases the transmission angle (30 ~ 90 degrees);
2. covers an area of small, low investment;
3, throughput, and enhance the high degree of higher
4. from level to tilt (or vertical) will make a smooth transition;
5.Low elongation
6. suitable for easy transportation of powder, granular, small block, paste and liquid-like materials
7. low energy consumption, simple structure, high strength tape, long service life.
8. Heat-resistant conveyor belt
9. Oil resistant conveyor belt
plastic conveyor belt/polyester conveyor belt Applications:
1.Applied for electric motors, internal combustion engines and power transmission equipments.
2.Adopting scientific technical composition, specially selected first class rubber material and low elongation reinforcing,
3.MOLIbrand Common V-belt is in accordance with related international standard.
4. high wearing resistance, low elongation and long life.
5.T he conveyor belt has passed the test, such as flame-retardant experiments, and obtained a certificate of coal signs and an authorized user.
plastic conveyor belt/polyester conveyor belt Structure:
Plastic conveyor belt/polyester conveyor belt is made up of upper , stretching layer , strength layer and compression layer .
(1) roller friction: roller surface temperature of not more than 325 degrees.
(2) torch burning: cotton degrees higher than the average time of flame torch 3.0S, to cover an average of less than 5.0S.
(3) propane burner; Nondestructive longer than 250mm.
Surface resistance values: on, below the average of not more than 3.0 × 10 8 power
With regard to the choice of the thickness of plastic cover:
Size:
Physical Characters Of plastic conveyor belt/polyester conveyor belt
Iterm | Between Plies N/mm | N/mm Between rubber and carcass | Elongation | ||
0.8-1.5mm | >1.5mm | Longitudinal elongation at break % ≥ | Longitudinal elongation at reference load % ≤ | ||
All the sample average ,N/mm,≥ | 3.2 | 2.1 | 2.7 | ||
All samples minimum peak,N/mm,≥ | 2.7 | 1.6 | 2.2 | 10 | 4 |
Note: All samples shall not exceed the peak values 20N/mm |
SIZE
Conver grade | Tensile strength ≥ | Elongation ≥ | Abrasion ≤ | Change Rate of tensile strengh and elong after aging | |
Mpa | Kgf/m2 | % | mm3 | % | |
(H) | 24 | 240 | 450 | 120 | -25~+25 |
(D) | 18 | 180 | 400 | 100 | -25~+25 |
Light(L) | 15 | 150 | 350 | 200 | -25~+25 |
plastic conveyor belt/polyester conveyor belt Store And Transport
1.In storage and transportation of Conveyor belt ,direct sunshine as well as the soaking of rain of rain and snow should be kept clean and the contact with acid,alkali,oil and organic solutions should be prevented.Cares should be taken to prevent mechanical damage.And,the belt should be 1 Km away from heat radiation devices.
2.The storage temperature should be -18--+40.
3.The performance will be kept unchanged in one year when the belt is in storage under the above condition.