Specifications

QVC-3 pellet feeding machine:
1.Auto feeding machine.
2.Vacuum transport feeding machine.
3.Powder Vacuum feeding machine.

QVC-3 pellet feeding machine

Applictions:

The QVC-3 pellet feeding machine ( vacuum loading machine ,vacuum conveyor) is a kind of vacuum transportation machine using pneumatic vacuum pump as vacuum resources.

We can directly deliver the material from storing-material canister to obturation containers, such as mixing machine and humid method cuber machine.

 

Using:

When turn the button of pneumatic valve to the position of "open", the air is compressed into vacuum pump, and produces vacuum, then the materials will automatically indraft mixing machine. After indrafting the materials, spin the pneumatic valve to the position of "closed", then the air in the mixing machine disappears. Meanwhile, the compressed air stored in gas bag blows the filter in reverseCharacteristic:--- Using compressed air as primary energy sources--- According with GMP standard--- Solving the stratification of powder and granules--- The filters made of Ti will never be jammed and be abraded--- Eliminate the static electricity--- Made of nontoxic and corrosion resistant materials --- Leakage free capsule, to prevent cross contamination--- Materials are not adhering to the inner surface of the conveyor --- Intelligent control and high automation--- Modular structure, easy to clean and dismantle--- Small and light, easy to install--- Low noise and free from vibration--- Energy saving and low running cost

 

Main specifications:

Type:QVC-3Transportation ability (kg/h)1500

Air pressure (Mpa)0.4-0.6Air consume (L/min)540

 

Technical parameters:

ypes	transportation ability (kg/h)	air pressure (Mpa)	air consume (l/min)	over size (mm)
QVC-1	350	0.4-0.6	180	dia.140*560
QVC-2	700	0.4-0.6	360	dia.213*720
QVC-3	1500	0.4-0.6	720	dia.290*850
QVC-4	3000	0.4-0.6	1440	dia.420*1150
QVC-5	6000	0.4-0.6	2880	dia.420*1150

 

Using:

1.Capsule filling machine

2.Tablet press

3.Square bin mixer

4.Mixer5.Pipage

 

Service:

A. To pick up machine more easy & correct.First, We need client to provide below information about their product:1) The requirement of raw material: we require powder or grains with good fluidity & dry, can fall down from cone charging barrel.2) We need know the size, shape of tablets / pills. Yield(capacity) in your request.So we can figure out if our machine can compress and which models will meeting with your requirement.B. We can design, customize and make dies for customers.