Specifications

1.Hot Mineral Collection:
2.High collecting efficiency and precision;
3.High recovery rate;
4.Large productivity;
5.ISO,SGS

High Precision Mineral Collection With High Reputation

 

Contact  Windy  +86-13526578789

                                                                                    

1. Uses Of Mineral Collection:

 

The mineral collection widely applies in the copper, the lead, the zinc, the nickel, the molybdenum and other non-ferrous metals, ferrous metals and nonmetal minerals rough selection, secondary selection and counter-flotation process work.

Beside it, there are also the magnetic separator(mainly for iron ore, hemitite, magnetite, etc), spiral chute and shaving bed(mainly for manganese ore, chrome, gravel gold,etc), We can also design the mineral collection system as practical mineral condition and customer's request.

                                   

  

2.Working Principle Of Mineral Collection:

 

After coal and potions fully mixing, they will put into the under slot of first room, after the impeller rotating, it formed negative pressure in the cavity, made under the tank and the trough’s pulp put into the mixing zone separately by the impeller’s under suction and up suction. It also can make the air into the mixing zone through along the sleeve, pulp, air and pharmacy mixed here. Under the effect of centrifugal impeller, the mixture pulp put into the mineralized zone, the air formed bubbles and crushed and full contact with the coal particles, then formed to mineralized bubbles, under the effect of stator plate and turbulence, evenly distributed in the trough of body section, and move up into the separation zone, enrichment formed bubble- layer, it will put out by bubble blowing machine, formed coal bubble. The unmineralization coal particles up in the bottom of the trough will mix, mineralized and separate with second time through the circle hole and the suction hole. In the bottom of the trough, part pulp which is not undrafted by impeller, they will through by middling box -buried in the ore pulp into the bottom trough of second room. Finish the full process of the first room. Then go to the third room, such a cycle flotation, the pulp through the last room into the tailings box, and then put out the final tailings.

 

Ready Mineral Collection In Stock

 

3.Technical Parameters Of XJK Series Mineral Collection:

 

Model			XJK-0.35(3A)	XJK-0.62(4A)	XJK-1.1(5A)	XJK-2.8(6A)	XJK-5.8(7A)
Effective cubage(m3)			0.35	0.62	1.1	2.8	5.8
Production capacity(m3/min)			0.18~0.4	0.3-0.9	0.6-1.6	1.5-3.5	3-7
Rotation speed(r/min)			470	400	330	280	240
Blade diameter(mm)			300	350	500	600	750
Motor	Model	Rotor	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y200L2-6(Y225M-6)
		Scraping plate	Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
	Power(kw)	Blade Motor	1.5	3	5.5	11	22(30)
		Scraping plate Motor	1.1	1.1	1.1	1.1	1.5
Weight(t/single trough)			0.43	0.86	1.38	2.33	3.533

 

                                            

4. Service Promise:

Before-sale services: We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.

On-sale services: products must be inspected strictly before sell, customers are invited to simulate and test machine on-the-spot and raise objections. We will organize delivery according to the clauses stipulated in the contract.

After-sale services: Our Company will send professional engineers to guide installation, debugging and training operators until customers are fully satisfied. Moreover, we can design and manufacture products according to customers’ specific requirement.

Note: for information purposes only, any questions please contact us!