Specifications

epoxy glue
1.two part, high hardness,gel-formulation
2.can use in high temperature
3.impair steel/iron casting
4.50g/set

                                    Kafuter Epoxy Adhesive/Epoxy Glue for Iron/Steel Impairing

 

Features:

Mainly filling tha sand holes, air holes, and crackings in iron and steel castings, high hardness, and can use in the temperautre of 100°c to 150°c.

 

 

Properties:

Appearance	A:Grey gel B:White gel
Ratio (By visual)	A:B=1:1
Hardness	≥80
Shear Strength	≥18
Full Cure Time(25°c)	12h

 

Directions:

1.First, clean the impaired parts by removing the oil and grease.

2.Clean the surfaces by knifes and papers.

3.Mix evenly the two parts by ratio of 1:1, and then coat on the parts.

4. After 24h, it can use into next process.

 

Attention:

After mixing, about one and half hour for the adhesive to coat on the surfaces, and the mixed adhesive should be using in a time without any residue.

 

Packing:

 

50g/set, 100set/carton