Specifications

epoxy glue
1.fast cure, transparent, two-part
2.envoronment, muti-purpose
3.can bond ANY substrates
4.20g/pairs

         Kafuter Transparent Two Component Epoxy Glue                           

Main Characteristics:

 (1) two- part, room cure, low odor, environmental epoxy adhesive, quick sets in 3~5 min, can cure below -20°c.

 (2) shelf life: 12 months

(3) Good performance in water and oil proof, weak alkali and acid, solvent and other chemical products tolerance.

(4) Good bonding with substrates like crystal, ceramics, glass, and metals without leaving any remarks.

 

Typical Properties:

 

 

Item	Part A	Part B
Appearance	Clear transparent liquid	Clear transparent liquid
Viscosity(25°c)	10000~20000CPS	10000~20000CPS
Mix  Ratio	A:B=1:1 (by weight)
Curing Time(°c)	3~5 min (10g mixture of A and B)
Shear Strength(3h)	≥10MPa
Shear Strength(24h)	≥18MPa
Working Temperature	-20~100°c

 

 Typical Applications:

 

 (1)Apply in the places which needs transparent  glue without any color, like bonding in the building materials, car fittings and electronics assembly, households, factory production and maintenance. 

(2) Especially great adhesion to crystal, ceramics, glass, rubber which requires transparent color on the bonding surfaces.

.

 Directions:

(1)The bonding surfaces should be clean and dry by removing the oil and rust stain, etc.

 

(2)Squeeze out and mix A and B part with equal volume on the amount required, then coating on the two clear surfaces and put them into together immediately. It can move to next procedure after three hours.

 

 Packing:

20g/pairs, 60pairs/carton