Z-Wave ZW201 IR Extender for Air Conditioners, smart home system
USD $52 - $78 /Piece
Min.Order:1 Piece
Dongguan NIE Technology Co., Ltd.
Fully complaint to Z-Wave command class.
Build-in 5 direction IR emitters(hemispherical coverage),
plus 3.5mm jack for external wired IR emitter.
Built-in AC IR code library.
Transmit IR control code with a wide range of carrier
frequency (15 to 455kHz).
Programmable power level (LOW or HIGH) for
external IR emitter to aviod saturation of IR receivers.
Safety and maintenance instruction
- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
- Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
- Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
- Keep all parts away from young children’s reach.
- Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
- Avoid dropping or shocks, this can damage the electronic boards.
- Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.
- Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.
Maintenance
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
NOTE
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Warranty 1 year