Technical Parameters & Operation notices

 INTRODUCTIONS

Built in the switch panel cassette or other places, through the open / receives the RF signal from the remote control receiver is connected in the electric appliance close, because each block is unique, has the possibility of protection against interference and programming;

Technical Parameters

Frequency: 433.92MHz

Operating Voltage: AC200~250V /50-60MHz

Automatic valve torque: 50M

Maximum load:Max 3500 W

Operation notices

1)Put the receive small box placed in a convenient wiring place, according to the wiring diagram wiring.(warming! Equipment must be shut off the power supply before by qualified professionals to wiring)

2)Programming the receiver (receiver), press and hold the self, until the LED flashes. Then, on your election as the transmitter to press the button, when the lights go out. Warning! In the course of programming, the receiver and the transmitter must be connected to the power supply!

3)Remote configuration of receivers, press and hold the button (receiver) learning, until the LED flashes. Release the button, press again, lasts 6 seconds. All stored information will be deleted.

Functional characteristics

1) Holding down the receiver study switch 3 seconds flashing lights, then press the launcher button to achieve code; a transmitter and a receiver based on the code, can form control; a transmitter can control a plurality of receivers;

2) The RF signal face barriers from the wall, floor, door in the process of transmission, the transmission distance with arbitrary transmitter (control panel, switch) decrease;

3) Metal doors and other metal structural shortening of radio signal range, until it disappeared;

4) After learning the code will not be lost because of power failure or receiver displacement, the receivers make the transmitter code stored in memory;

5) Remove code, need to hold down the receiver learn button, until the receiver indicator lights and release the button , then again at a time, go out after the lights flash 3 seconds, so that all the stored information will be deleted;

Security measures

1) Identify all electrical connections and cable installation principles and in accordance with the instructions for use;

2) Don't make the socket or extender overload, may cause a fire or electric shock;

3) Equipment connection and installation must be used in the professional services;

4) All parts in children can't reach it;

5) Don't be stored in high humidity sensor room, too hot or too cold;

6) Not allowed to fall or collision;

7) In case of damage, cut off the circuit network device and contact the warranty;

8) In the use and installation of wireless devices (mobile phone, interphone) process, the microwave oven can cause interference in its;

NB

Don't open the equipment, equipment does not need maintenance. The warranty does not cover to opened products, as for the external pollution, can use dry cloth or brush cleaning, cleaning, and turn off the power equipment. Do not use cleaner gasoline, alcohol, carbonate, or other similar agents, they will cause equipment damage to the surface. In addition, gas for your health is in danger; do not use sharp edge tool, screwdriver, metal brush or similar equipment cleaning.

Warranty 1 year.