6 channels universal controller with CE Certificate
USD $2.11 - $2.64 /Piece
Min.Order:3000 Pieces
Dongguan NIE Technology Co., Ltd.
Technical Parameters & Operation notices
INTRODUCTIONS
Use the remote control to open or close the RF signal through the connection to the receiver. The remote controller has four channels, in order to control up to four receivers. Because each block is unique, has the possibility of protection against interference and programming;
Technical Parameters
Frequency | 433.92MHz/868.42MHz |
Channels | six channels |
Operating Voltage | 12V DC (battery 12v 23A*1pc) |
Automatic Valve Torque | 50M |
Operation notices
1) Open the remote control on the back of the battery cover;
2) Install the 1*12V23A battery, the battery cover and cover;
3) Programming of the device programming channel remote control receiver, please follow the steps below:
a: According to the receiver learn button for 3 seconds, until the lights flashing, press the remote control to any of a group of keys, the corresponding channel can be controlled to a receiver programmed into the;
b: Through the open / close the ON/OFF remote control receiver button;
c: The controller has a total of four channel can be programmed;
Functional characteristics
1) Holding down the receiver study switch 3 seconds flashing lights, then press the launcher button to achieve code; a transmitter and a receiver based on the code, can form control; a transmitter can control a plurality of receivers;
2) The RF signal face barriers from the wall, floor, door in the process of transmission, the transmission distance with arbitrary transmitter (control panel, switch) decrease;
3) Metal doors and other metal structural shortening of radio signal range, until it disappeared;
4) After learning the code will not be lost because of power failure or receiver displacement, the receivers make the transmitter code stored in memory;
5) Remove code, need to hold down the receiver learn button, until the receiver indicator lights and release the button , then again at a time, go out after the lights flash 3 seconds, so that all the stored information will be deleted;
Security measures
1) Identify all electrical connections and cable installation principles and in accordance with the instructions for use;
2) Don't make the socket or extender overload, may cause a fire or electric shock;
3) Equipment connection and installation must be used in the professional services;
4) All parts in children can't reach it;
5) Don't be stored in high humidity sensor room, too hot or too cold;
6) Not allowed to fall or collision;
7) In case of damage, cut off the circuit network device and contact the warranty;
8) In the use and installation of wireless devices (mobile phone, interphone) process, the microwave oven can cause interference in its;
NB
Don't open the equipment, equipment does not need maintenance. The warranty does not cover to opened products, as for the external pollution, can use dry cloth or brush cleaning, cleaning, and turn off the power equipment. Do not use cleaner gasoline, alcohol, carbonate, or other similar agents, they will cause equipment damage to the surface. In addition, gas for your health is in danger; do not use sharp edge tool, screwdriver, metal brush or similar equipment cleaning.
Warranty period is one year.