Specifications

biomass fuel briquette equipment
1,Machinery of renewable resources in the countryside
2,Mold disassembly convenient

Descreption of biomass fuel briquette equipment :

 

    biomass fuel briquette equipment adopts new compression mode, main shaft bearing uniform, mold disassembly convenient maintenance , variable vertical loop structure for horizontal loop mode of production . use their own principle of rotating centrifugal force to make raw material evenly to all toolings, avoided due to local material concentration phenomenon of boring machine. With high quality of this machine for wood density, compression raw material special innovative design, increased pressure roller, unique molding Angle, get rid of the other compressor compression to the disadvantages of electrical heating forming discharging.

 

 

The characteristics of biomass fuel briquette equipment :

 

(1)Completely abandoned the heating coil, greatly reduces the energy consumption, save 6 KWH per hour .

(2) Multi-channel combined seal design to eliminate dust into the bearing lubrication parts .

(3) Core component using high wear-resisting, high strength, high toughness special materials forging forming.

(4) Abandon the electrical heating, automatic temperature adjustment, save power consumption by more than 40%.
(5) Biaxial synchronous symmetrical mechanical design, high production efficiency, good stability, low failure rate.

(6) Improving design mould, convenient for clearance adjustment

 

Range of work of biomass fuel briquette equipment :

 

  Corn stalk, cotton wood, bean straw, chaff, rice straw, straw, peanut seedling (shell), clover, ShaDaWang, furfural residue, the ginger residue, bark, crop wastes of raw materials. Especially for the heavier material itself, such as: cotton wood, peanut shells, furfural residue such as production capacity.

 

 

Main technical parameter of biomass fuel briquette equipment :

 

Parametermodel	9HYK-1000	9HYK-2000
Motor power(kw)	37	45
Max production capacity(kg/h)	800-1500	1500-2000
Forming specifications	32-32(block)	Ø6- Ø15( particles )
Mold number	36 hole	45 hole
Forming density (g/cm³ )	0.8-1.2	0.8-1.2
Heating coil power	4	4
Material moisture content	20-40%	20-40%
Length of applicable material (mm)	2-60	2-60
Moisture content after forming	≤15%	≤15%
Machine dimension	2500*1400*2000	3000*1700*2000
Total weight(t)	1.8	2.4

 

 

If you want to learn more about biomass fuel briquette equipment, please contact me!