Specifications

brick laying machines
1.The operation is simple
2.The cost is low
3.High production capacity

 brick laying machines   

        This      brick laying machines in india is small investment, the function, high efficiency, high degree of automation, is well received by the customers like it.

 

 

technical parameters

 

 

 

The molding cycle                   10 to 15 seconds/time 

 

Design production capacity       6000 pieces/class  3 piece/mold

 

The vibration frequency           4600 times per minute - 6100 times/min

 

The excitation material            22 kn

 

Vibrator                                 6 kw power

 

oil pump                               About Cb32 flat   Q = 40 ml/r p = 10 mpa

 

Oil cylinder                            80 x300   pole size 40

 

Cylinder                                 63 x250   pole size 40

 

Hydraulic system pressure rated   27.5 million mpa

 

The installed capacity               17.95 kw

 

plate specifications                   750 mmx530mmx30mm 

 

The weight                             4.5 tons

Dimension                             6100 mmx3600mmx2650mm 

 

 

Production technology and ingredients

 

 

1. The production area should more than 300 square meters, factory building could be   (8 m *15m) 100-200 square, and three-phase power source is need.

2. The first thing to prepare is some plate in order to use brick,which can use the old template, bamboo veneer cutting. Plate specification: 750*530*30mm, quantity: 600-1000.

3. A better quality of cement used no. 325 or 425 cement, conditional can prepare some fly ash, fine fine stone, coarse sand within 0.5. Also can be directly use stone powder, it has served the less fine stone grain.

 

 

 

 

 

 

 

 

 

If you need please feel free to contact me at any time