Name: hot sale DTS3666 three phase four wire *Analog active watt-hour Electronic Energy power Meter
Brand: Mseed
Availability: InStock

Product Details

Product Details

Product Introduction

Quick details:

Place of Origin: Zhejiang, China (Mainland)
Brand Name: Mseed
Model Number:DTS3666
Phase: Three Phase
Output Voltage: 220/230V
Dimensions: 228*145*72 (mm)
Operating Temperature: -25℃~50℃
Input Frequency: 50 or 60Hz energy meter with RS485

Features

1.Stable measuring accuracy, general speaking, it would be free from effect of frequency,      temperature, voltage or high order harmonic. After leaving the factory, it is unnecessary to make further regulation to the complete machine, it is allowable to prolong the verification   period, which sharply reduces the testing and inspection work of power depart-ment, it has obviously advantage in reliability when comparing with other similar products.

2.Bi-directional measuring function, it is able to measure out the for-ward and reverse active energy accurately, and the reverse active energy would also be reckoned in forward value.

3.It is able to reserve the data of electric quantity permanently without help of standby          battery.

4.The register will be driven by single chip directly, preventing pulse-loss phenomenon          during power on or off, which guarantees consistency of meter reading data and register       indicating value, avoids unnecessary dissension due to inconsistency of data.

5.Adoption of optical coupling isolated passive pulse output interface .

6.This meter is featured with wide load, high accuracy, high reliability, high sensitivity,           straight error curve, low power consumption, small vol-ume, light weight, energy saving,       material saving, direct register display, etc.

Parameters

Type	Class index	Reference voltage Un	Rated current
DDS	Class 1 Class 2	3×100V	3*1.5(6)A
DDS		3×380V	3×1.5(6)A
DTS		3×57.7/100V	3×1.5(6)A
		3×220/380V	3×1.5(6)A
			3×2.5(10)A
			3×5(20)A
			3×10(60)A
			3×15(60)A
			3×20(80)A
			3×30(100)A

Load current	Power Factor	Elementary error(%)
Load current	Power Factor	Class 1	Class 3
0.05Ib	1.0	±1.5	±2.5
0.1Ib~Imax	1.0	±1.0	±2.0
0.1Ib	0.5(lag)	±1.5	±2.5
0.1Ib	0.8(advance)	±1.5	－
0.2Ib~Imax	0.5(lag)	±1.0	±2.0
0.2Ib~Imax	0.8(advance)	±1.0	－

Applications

1.Starting: under conditions of reference voltage,reference frequency and power factor is 1.0, the meter should be able to start and measure the electric energy normally when meter of class 1 is 0.4%Ib and meter of class 2 is 0.5%Ib.

2.Creeping: anti-creeper logical design, apply a reference voltage of 1.15times to the voltage circuit, while there is no current in current cir-cuit, testing output of the meter shall not produce more than one pulse.

3.Power consumption: ≤2W (5VA).

4.Ambient conditions Standard working temperature: -25℃～55℃

Limiting working temperature: -25℃～60℃

Note: limiting working temperature for special requirements: -40℃～70℃

Dimension

Working principle

Wiring diagram

Packing Details

Being packed according to the international standard is to guarantee safe delivery during the transportation.

Factory Details

Why Choose Us

•Professional manufacturer with internationally standard production lines and a devoted technical team.

•Strict test procedure with advanced test equipment

•Responsive and responsible service team.

•Door to door service when needed.

•Helpful and enthusiastic in developing the buyers’ business.

•Treat your career as our career.

Certifications:

Welcome to contact us:

For sales or information inquiry, please contact us in the following ways:
Mob:+8613588948309
Tel: +86-577-55770369
Skype: barbara_ye(+86-13588948309)
Trade messenger:barbara ye
Website: http://mseed.en.china.cn