Product Details

APPLICATION

Model M100SCR single phase electronic multi-rate DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has completely its independent intellectual property rights and minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority KEMA. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has seven digits LCD monitors shows various consumption data and information. And there are far infrared and RS485 communication module in it. It’s used for setting and reading the meter. Contact with all kind of AMR system conveniently. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.

Model	Accuracy	Rated Voltage(V)	Rated Current(A)	Starting Current(A)	Insulation Performance
M100SCR	Class 1 Class 2	220V 120V	2.5(10),3(15) 5(20),10(30) 15(90),20(100) 5(40),5(100)	0.4%lb 0.5%lb	AC voltage 2kV for 1 minute,impulse voltage 6kV

.35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63mm), users can choose any one bye themselves.

.Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

.Have two tariffs, and port of set the tariff, input control voltage 0-90 Vac, set up tariff F1, input control voltage 150-400 Vac, set up tariff F2, the tariff conversion is controlled by timer outside or similar equipment.

.May select cycle display (default) or push the button itemize display, it can display 6 data at most. Can select the data which displayed. The decimal median which displayed can choose set one or two.

.Use memory that is not lost easily, the data can be kept forever after power cut off.

.A port of pulse output passive (polarity), complying with standard IEC 62053-31.

.There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter, communication protection complying with standard DL/T645-1997.

.Six LED instructions respectively power state, signal of power impulse, the direction of the trend of load current, the state rates just now and the data communications state.

.Single direction measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC62053-21.

.Standard configuration type S connection(Inlet from bottom, outlet from top) for direct connect to use, we can also choose another type of connection, and use CT(product configuration code is BN) and PT & CT(product configuration code is BP) for operation.

.Standard configuration extended terminals cover, may select short terminals over, in order to protect to use electricity safely.