Product Details

Product Description

APPLICATION

Model M100S single phase electronic DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net., it can display total energy consumption by step type impulse register. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.

Detailed Images

Functions & Features

Model	Accuracy	Rated Voltage(V)	Rated Current(A)	Starting Current(A)	Insulation Performance
M100S	Class 1 Class 2	220V 120V	2.5(10),3(15) 5(20),10(30) 15(90),20(100) 5(40),5(100)	0.4%lb 0.5%lb	AC voltage 2kV for 1 minute,impulse voltage 6kV

.35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.

.Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

.Standard configuration 5+1 digits display(99999.1kWh) by step motor and pulse machinery counter. May select 6+1 digits display(Product Configuration code is SC).

.Standard configuration one port of pulse output passive (polarity), may select distant impulse output with no power(no polarity).,(Product Configuration code is AJ).And contact with all kind of AMR system conveniently, complying with standard IEC62053-31 and DIN43864.

.Bicolor LED instructions power state (green) and signal of power impulse(red).

.Standard configuration don detect direction of the trend of load current. May select automatic detecting the direction of the trend of load current.And Instructions (Only red power impulse signal when working, if no green power, that is meaning the load current reverse).

.Single direction measure single phase two wire active power consumption. It is nothing with direction of the trend of load current. Complying with standard IEC62053-21.

.Directly connect and use, there are two type you may select. Standard configuration type S connection, may select type T connection(Product Configuration code is TH).

.Standard configuration extended terminals cover, in order to protect to use electricity safely, may select short terminals cover.(Product Configuration code is AG).