1.Power source:  110~130V/AC 220~240V/AC 

2.Detection range:  360 degree 

3.Detection distance:  2-10m (adjustable)

4.Time-delay: 7sec-10min 

Welcome to read ES-M14 High Frequency MV motion sensor !

   The product is a new saving-energy product; it adopts microwave sensor mould withhigh-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible through doors, panes of glass or thin walls.

SPECIFICATION:

 FUNCTION:UNCTION:

• Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 5LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
• SENS adjustable: It can be adjusted according to using location; low sensitivity with only 1m (radius) for detection distance; High sensitivity could up to 8m (radius), it fits for large room.
• Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 6sec±2sec. The maximum is 12min±1min.

INSTALLATION :(see the diagram)

• Switch off the power.
• Please move the upper cover with anti-clockwise whirl as per the diagram in the crust.
• Screw off the middle cover; fix the bottom on the selected position with the inflated screw.
• Connecting the power and the load to sensor as per the connection-wire sketch diagram. Then screw on the middle cover.
• Buttoning the upper cover on the sensor, whirling the cover with clockwise. Then you could switch on the power and test it.ECTION-WIER SKETCH DIAGRAM