Specifications

The Pure & Ultra Pure system - A device producing RO & UP simultaneously from tap water.

Product Description

The Pure & Ultra Pure system – A device producing RO & UP simultaneously from tap water. 

Product Feature

special feature 

- Certified CE 

- Certified ISO 9001, ISO 14001 

- Obtained GD, QD Mark (Good Design, Qualified Design) 

- Awarded the Korean Excellent Products - Built-in RS 232C Port 

- Built-in volumetric dispensing function by timer 

- Auto calibration for water sensors 

- Auto regular recycling to maintain the optimum water quality level

Product Specification / Models

1. Product Flow Rate : Max. 15~35L/Hr 

2. Water Quality Display : - Feed water : 0 to 999us/cm (Temp function: Option) 

- Pure Water : 0.2 to 250us/cm, - Ultra Pure : 0.0 to 18.3MOhm-cm 

3. Display : 16 x 2 Characters Backlight LCD Digital Display 

4. Controller : Microprocess one touch technology 

1) Self Test : Self-diagnosis for external & internal system operation condition 

2) Auto cleaning : At first switched-on, the system functions "auto-drain" to drain out all of the contaminated inside remaining waters.

3) Auto cleaning 

-Automatically the cleaning time will be set in proportion to inside contamination level 

-Auto-cleaning when the system produces higher than setting value 

-Auto-cleaning for maintenance of optimum water purity when stand-by 

-Flushing time setting : 1 to 99min 

-Period cycle : 1 to 99Hrs.

4) Auto monitoring function for UP value : To maintain continues stable UP value 

5) Volumetric dispensing : After setting timer, the quantitative water production is available 

6) Auto sensor calibration : Automatic compensating function to maintain the sensor accuracy 

7) Filter & UV Lamp Exchange Indicator :

 [1] A/C Filter [2] Zeneer RO Pack [3]Zeneer UP Pack [4] 254/185 UV Lamp 

8) Programmable by 2 steps as below : [1] 1st alert message : 1st reminder for filter exchange 

[2] 2nd alert message : Filter pack must be exchange

9) Built-in RS232C Port :

[1] Various applications, maintenance and print are available by interfacing with PC. 

[2] Software function (Optional Accessoreis)  

   (a) Feed water value, UP value – analogue, digital, graphic display 

   (b) RO & UP flow rate display 

   (c) Various function Inspection 

   (d) Self-diagnosis for whole parts in internal system 

   (e) Filter exchange step indicator 

Feed water value, UP value – analogue, digital, graphic display 

5. Safety Functions 

1) Low Pressure of Tap Water : Auto/Manual operating modes. 

2) Automatic pump Stop Functions : [1] Low pressure [2] Tank full [3] Suspension of tap Water supply 

3) Automatic adjustable function for products & drain volume 

4) Automatic perception function for Feed water : Prevent the error occurred by temporary decreasing or sudden rise of feed water pressure

6. Standard Accessories : Pretreatment system : HMC-PT-3 RO System : Zeneer Pre Pack, Zeneer RO Pack.

UP System : Zeneer UP Pack, 0.2um Final filter, 254/185 UV lamp, MW 5000 UF filter.

Level Sensor, Hand lever, Manual, Power cord. 

7. Dimensions(W x D x H) : 390 x 460 x 470mm 8. Power : 220V, 50/60Hz, 60W (110V is available) 

* 3 model depending on the flow rate Zeneer Power I (Max. 15L/Hr), Zeneer Power II (Max. 25L/Hr), Zeneer Power III (Max. 35L/Hr) 

* 4 type depending on the application of UP 

1) Scholar type : AAS, ICP/MS, IC 

2) Scholar-UV type : Scholar type + HPLC, GC, TOD 

3) Bio type : Scholar type + Cell & Tissue Culture, IVF, Electrophoresis 

4) Integrate type : Available for all the above application 

Application

The unit meets the application field explained previously. 

Other Information

Certified CE, ISO 9001, ISO 14001, SD (Success Design) mark

Auto regular flushing for maintain the optimum water quality level 

16 x 4 Characters Backlight LCD Digital Display 

Built- in RS 232C Port 

Built- in volumetric dispensing function

Built-in TOC Monitoring (Option)