This coating is a liquid macromolecule waterproof material, is suit for constructing on dry, wet base, after coating it will cure,become durable, high elasticity, nontoxic, odorless waterproof membrane.It have water based and solvent based polyurethane waterproof coating,is a new type environment friendly waterproof material.

Advantages of construction: 

-The time of drying and curing is obvious shorter than national standard, which is good for construction period;

-The coating is dry and not re-sticky after curing;

-Not containing toxic and harm solvents like methylbenzene, di-methylbenzene, tri-methylbenzene, etc;

-Not containing volatile solvent and strong smell;

-High solid content (up to 98%);

-Good performance of physical mechanics, satisfying all indexes of typeⅠandⅡwaterproof coating.

-Can be exclusive used or can be used with other waterproof membrane

Application

1).Various types of roofs: including cement, bamboo, timber, steel, asbestos shingle,and different shapes of roofs.
2).Underground structure: inner wall, exterior wall, bottom plate, elevation pit, retaining wall,underground tunnel, well, pipeline of underground concrete.
3).Surface structure: bridge, motorway, toilet, kitchen, bathroom, swimming pool, flowerbed.
4)Joint: expansion joint, construction joint, settlement joint, crack in the wall, coiled membrane joint.
5).Antisepsis: metal pipe, antiseptic terrace, antiseptic pool, wall, oil tank, sewage tank.
6).Adhesion: wood floor, cement board, ceramics, tiles, glazed tiles and etc.

Production lines

Construction Technology

Base course: The base course must be solid, clean, flat, and humid, no greasy dirt or dust; when there is a flaw or crack, it must be repaired by using cement mortar; and external corners should be made into circular arcs by spatula.
Stir and mix: Pour the additive into container with a certain ratio then pour the powder into the additive and stir adequately till they become mucilage without granules; to prevent layering and sediment, stir intermittently during use.
Construction: Directly use brush or brush roll to brushing the base course evenly, and make sure that there are no missed areas; brush 1 layer for damp proof, and 2-3 layers for waterproof. Brush the second layer when the first layer is not sticky (1-2h), and the direction shall be vertical.
Coating protection: After finish the slurry constructing, the coating shall be protected including pedestrians prohibited; rain erosion, insolation or sharp objects etc, it does not need special protection after the coating has been dry.
Coating maintenance: After construction have been done for 24h, use wet cloth to cover or spray with water to maintain the coating for 2-3days; if there’s high humidity or airless, drying time of coating will be longer, conversely it will shorter. Use mechanical ventilation to speeding if necessary for the project schedule.
Construction temperature: Between 5-40°C.

 

Cautions

1. Construct after the base coating is dry.
2. After the coating mix with water, use it within 30 minutes.
3. Do not walk on the film until it becomes dry, protect coating layer.
4. Put some coarse sand on the coating wall to intensify the adhesive action between the coating and protective layer.
5. Wear protective cloth when working.
6. Make protective layer upon acceptance.
7. Add dryer while constructing in low temperature(0°C—10°C)

Transportation, Storage and Packaging
Avoid exposed to the sun and rain and colliding during transportation.
Storage: It must be stored at cool and ventilated space, and the temperature must above 0°C, do not upend. 
Guarantee period: 12 months
Packing size: 5kg,10kg, 20kg/ bucket

1.   Our warranty period is one year against the date of shipment.

2.   Free samples of waterproof membranes are available for your closer checking.

3.   Well trained and experienced sales person to help you with any of your questions.

4.   Strong technical support.

5.   We will handle with each piece of document which are necessary during export to abroad and try our best to provide any special required documents in destination customs, Such as the certificate of origin.

Any questions, pls contact us freely.