Specifications

ISO9001:2008, ISO14001:2004,GB/T28001:2011 certified 
National inspection-exempt 

Porduct  Features:

Polymer cement-based waterproof coating is made of a synthetic polymer emulsions (such as polyacrylate, polyvinyl acetate, styrene-butadiene rubber emulsion) and various additives to optimize a combination of liquid material and matching powder (a special cement , graded sand composition) composite made of two-component waterproof coating, is both of a synthetic polymer material with high flexibility and inorganic materials with good durability. Polymer cement waterproof coating is flexible waterproof coatin

Main features:

1.Polymer modified: strengthen each substrate adhesion. 

2.Good flexibility: can be affected by a slight vibration and displacement of not more than 2-3mm wide (flexible waterproof). 

3Weather resistance: apply a wide range of environments can be used for exposure, such as days noodles. 

4.Simple Construction: cement-based products, waterproof layer directly above the paving tiles, plaster or paint. 

5.Construction damp areas: Due to the internal coating material must penetrate through the role of water in the end, therefore, moist areas can construction, such as concrete dry, must be soaked with water before construction. 

6.Environmental protection: non-toxic, can be painted directly to the pool water. 

7.Hazard: Non-combustible material, non-corrosive.

Applicable Scope:

It is widely used in all kind if waterproof anticorrosion projects,especially suitable for the following projects

a)the waterproofing works of high-speed railway,tunnel,concrete road and bridge

b)all kinds of industry and civil construction roof waterproofing projects

c)the underground waterproofing and moisture-proofing works of industrial and civil constraction,as well as indoor swimming pools

d)the waterproofing government projects like subway,landfill and sewage farm

e)the waterproofing antiorrosion projects of water conservancy

f)the waterproofing projects of bridge,airplane parking area.

Construction Requirement

1.Make sure substrates are leveled, firm, clean and no visual water. Any cracks should be repaired first. Internal & external corners need to camber. And dry substrates should be moistened.
2.Primer Treatment: Mix emulsion with water at the weight ratio of 1:1, then brush the mixture on the substrates.
3.Add power into the JS slowly, stirring the mixture evenly until uniform with electric mixer for 5 mins. Proportioning of waterproofing coating: Weigh materials as emulsion/cement=1/0.8(type I) or 1/1.2 (typeⅡ),or 1:2 (type Ⅲ). If necessary to dilute with water, make sure the water weight can not exceed the JS’s 10%.
4.Brush thinly for several times with scraper evenly. The next brushing should conduct after the prior becomes hard drying.
5.Application method with fiberglass mesh: Generally needs two times brushing. Place the fiberglass mesh after the first brushing, and keep it leveled. Do the second time brushing after the prior coating film becomes surface drying but not hard drying.

Packaging & Shipping

1.Packing with strong wooden case in case of extruded.
2.Large quantity would be shipped via sea freight to your local seaport.
3.The delivery time is 5 days after receiving the deposit.

Our Services

1.Free samples can be provided to test. 
2.Powerful construction technical support.
3.Use wooden case shipping to ensure safety transportation.