Introduction

Double component waterproofing coating belongs to solidify waterproof materials. A component is a polyether-type isocyanate prepolymers, B component is the colored liquid which is made up of plasticizer, curing agent, thickener, coagulant and filler. When using this coating, you should mix A component, B component in just proportions, brushing on the surface of waterproof substrate, and then form a rubber elastic membrane to reach the purpose of waterproofing.

Characteristics 

1.High elasticity and extensibility of film forming, no seamless

2.Weather resistance, acid& alkali resistance and strong adhesive properties

3.Environmental protecting product

Application

1)Various types of roofs: including cement, bamboo, timber, steel, asbestos shingle,and different shapes of roofs.
2)Underground structure: inner wall, exterior wall, bottom plate, elevation pit, retaining wall,underground tunnel, well, pipeline of underground concrete.
3)Surface structure: bridge, motorway, toilet, kitchen, bathroom, swimming pool, flowerbed.
4)Joint: expansion joint, construction joint, settlement joint, crack in the wall, coiled membrane joint.
5)Antisepsis: metal pipe, antiseptic terrace, antiseptic pool, wall, oil tank, sewage tank.
6)Adhesion: wood floor, cement board, ceramics, tiles, glazed tiles and etc.

Production lines

Construction Technology

Base course: The base course must be solid, clean, flat, and humid, no greasy dirt or dust; when there is a flaw or crack, it must be repaired by using cement mortar; and external corners should be made into circular arcs by spatula.
Stir and mix: Pour the additive into container with a certain ratio then pour the powder into the additive and stir adequately till they become mucilage without granules; to prevent layering and sediment, stir intermittently during use.
Construction: Directly use brush or brush roll to brushing the base course evenly, and make sure that there are no missed areas; brush 1 layer for damp proof, and 2-3 layers for waterproof. Brush the second layer when the first layer is not sticky (1-2h), and the direction shall be vertical.
Coating protection: After finish the slurry constructing, the coating shall be protected including pedestrians prohibited; rain erosion, insolation or sharp objects etc, it does not need special protection after the coating has been dry.
Coating maintenance: After construction have been done for 24h, use wet cloth to cover or spray with water to maintain the coating for 2-3days; if there’s high humidity or airless, drying time of coating will be longer, conversely it will shorter. Use mechanical ventilation to speeding if necessary for the project schedule.
Construction temperature: Between 5-40°C.

Cautions

1. Construct after the base coating is dry.
2. After the coating mix with water, use it within 30 minutes.
3. Do not walk on the film until it becomes dry, protect coating layer.
4. Put some coarse sand on the coating wall to intensify the adhesive action between the coating and protective layer.
5. Wear protective cloth when working.
6. Make protective layer upon acceptance.
7. Add dryer while constructing in low temperature(0°C—10°C)

Transportation, Storage and Packaging

Avoid exposed to the sun and rain and colliding during transportation.
Storage: It must be stored at cool and ventilated space, and the temperature must above 0°C, do not upend. 
Guarantee period: 12 months
Packing size: 5kg,10kg, 20kg/ bucket

1.   Our warranty period is one year against the date of shipment.

2.   Free samples of waterproof membranes are available for your closer checking.

3.   Well trained and experienced sales person to help you with any of your questions.

4.   Strong technical support.

5.   We will handle with each piece of document which are necessary during export to abroad and try our best to provide any special required documents in destination customs, Such as the certificate of origin.

Any questions, pls contact us freely.

Shandong Fuhua Waterproof Materials Co.,Ltd. as one of the biggest specialized building materials manufacturing enterprising in Shandong province,group operated with a comprehensive products range and strong producing capacity, yearly manufactures SBS/APP modified bitumen waterproof membrane and self adhesive modified bitumen membrane 5million sqm., polythene and polypropylene polymer compound waterproof membrane 2million sqm., PVC/EPDM/TPO waterproof membrane 2 million sqm., colorful polyurethane waterproof coatings 300000tons and so on.

All products got the approval of ISO9001 and ISO14001 certificate, parts CE certificate and some of products has reached American ASTM accredtion standard.

We have exported  to Southern east Asia, Middle east, Europe, Africa, America and Australia widly. Go to the world and service the world,we intent to take your hands to create one brilliant future in building materials industry

Certificates: