Product Details

2016 new seamless welding machine

Product Description

This equipment is designed professionally for the coated fabric,sealing film or foil and homogeneous coating and PE-coated webbing belt lap welding that is make in PVC-P,PE,TPO ECB,CSPE,EPDM,PVDF. To help you understand the characters features of this equipment and know how to operate safely and keep in good condition etc. We give you THE MANUAL OF INSTRODUCTIONS for your reference.

1.General instruction for safety:

Warning: The basic principal of safe protection should be followed to reduce the danger of fire in disaster, electric shock and personal harm. Please pay attention to the following items carefully before operation.

1.Keep the working place clean. Messing up and the disorderly working place cause disaster

2.Choose the work place carefully and use the machine in a bright and dry circumstance.

3.The electricity, controlling box and protective facilities have to be in the proper order after finishing daily work. The electrical power supply has to be switched off definitely.

4.The machine has to be stopped before gets maintenance or replacing the parts.

5.Use standard or indicated tools when dismantling or replacing parts.

6.For safety and the long life of the machine, please do not let the machine operates overtime.

7.If any special incidents happened, please stop the machine first for repairing, And do not deal with the special incident with improper procedures.

8. If the machine is operated on land, keep the work place clean and no dust there. If dust or something blocks the inhaling filter of heater, the heating wind can not come cut adequately and then temperature inside of filter will rise to let the heater burn down.

Moving,Dismantlement,Installation,Cleaning:

1. Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully.

2. Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately.

3. The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply.

4. Keep the installation place no dust and avoiding sunshine.

5. Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation.

Specification:

Voltage:AC220V

Powe:3400W

Frequency:50HZ

Working Temperature:20-700degree(adjustable)

Welding speed:1-15m/min(adjustable)

Packing size:480*370*260mm

Welding Area:2-6cm

Net weight:20kgs

certification:CE&ROHS

Connecting the power supply:

Connecting the electric wire to the reserved plug(AC220V)of controlling box.

Operation:

1.Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.

2.set the tempetature and walking speed: Connect the power supply, set the temperature and walking speed according to the thickness of the cloth. Temperature and speed is adjustable. As shown:

3.. Turning the heating switch (yellow knob), the machine starts to heat up. Figure

4.Measured value reaches the set value, such as about 2-3 minutes, when the actual temperature display around plus or minus a fixed number

5.Welding positioning. Lap welding pressure- wheel edge must be aligned with the upper edge of the film, but also aligned with the guide wheel on the side edge of the film. Figure:

6.Lifting the handle, making the wheel on the land.as the show

7.start welding: pulling the heat gun to positon handle and making the nozzle close to ground then move the nozzle to left so that it can be place a right position, at that time, the welding will wolk by itself.

8.the process of welding:make sure the nozzle connect both with upper and under piece of cloth.And the nozzle and the wheel is walk in a straight line along the side seam.If not,walk along withthe side seam, you can adjust the machine with your hand.

9.finishing the welding: when we finish these work, pull the handle shake, turn rigth to move out nozzle until stops rotating nozzle upwards and it is locks.

10.Turn off the switch: when the work have done, turn off the yellow knob,shut off main power supply when the PV value is less than 50 degree.

NOTE:

For first-time users, you can get a piece of scrap cloth to measure the temperature of the required , test methods are as follows:

Making quickly the cloth next to the nozzle, if there is a burning cloth, it shows the temperature at this time is possible. the effect of weldong should be as follows:

Notice

1. During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.

2. During operating,if the seaming part is not in right position, please stop to adjust fixing position.

3. During operating, make sure clothes are flat so that stick together smoothly.

4. The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.

5 Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes.

Maintenance:

Take care the nozzle.Use brush to clean if there is dust or block in the nozzle or filter.

Packaging & Shipping

1.Wooden package

2.Any express company as you like

Our Services

1. We have the technology departments, Its able to solve technical problems on time

2. We have rich experience and professional of advertising equipment and heat transfer equipment

3. Special appearance and structure not only practical, but also fashion

4. We have been update products anytime.lets customers have more choices

5. We have very good after sale service, we provide service of one year warranty

Company Information

Shenzhen Brightness Electronic Technology Co., Ltd. from its inception in 2006, has been committed to production and sales of professional advertising equipment and heat transfer equipment. we export to Southeast Asia, the Middle East, Africa, Europe, America and other parts of the world and gain fame from Chinese and foreign clients.Brightness hold the spirit of high-tech, high-quality, good service, dedicating to providing the best products and service for customers. "Learning, innovation, cooperation and upgrading"is our corporate philosophy.During building a friendly cooperation with internal and external partners, our step never cease to improve quality of products and service, enhance corporate image , promote company and social efficiency, aiming to create a win-win situation and tailor the right solution for our customers. Brightness will serve old and new customers better with the unswerving technology advantage and market style, move on for the more prosperous future.

FAQ

1.How about the products of Warranty ?

·We provide main parts of products about one year warranty when you use it by normally

2. Are u manufacturers?

·Yes .we produce most of products and accessories we also have our long -term cooperation factory

3.Whats kind of payment you accept ?

·We can accept many payment such as:T/C T/T Western Union Paypal and so on

4.Why choose us ?

·Our machine export to over 60 countries ,we have rich experience to do the export and the stability of the machine won great reputation from our clients

·If any technical issues, you can contact with our technician directly. They will help you solve the problem by Skype or email. So you can rest assured about the after service.

·We provide free training in our factory or company .

5.How to order ?

·After confirmed order details ,we will make Commercial invoice for you .

·We will prepare and arrange the delivery for your goods ASAP once check your payment