Specifications

1.Popular banner seam welding machine
2.10KG convenience to take and operate
3.Good welding quality,best price,high speed

Popular Banner Seam Welding Machine

 

Banner Seam Welding Machine parameter:

Adjustable work temperature: 50-600

Adjustable: self-move speed 0.8-15M/per minute;

Specification:450*310*320mm

Alternant electric voltage: 220V/50Hz;
Upper limit power: 2000W ;

Whole weight: 10 kilogram;

Splicing width: 3-5cm.

 

 

Banner Seam Welding Machine Advantage :

 

1.large power-2000w instead of 1200w ;

 

2.updating the cooling system , moving the cooling system to back , when the machine is with high temperature , the cooling system can do the cooling well , even will not effect on the fan ;

 

3.the size of nozzle is twice of the former one , so it can do the heating and cooling better ;

 

4.updating the noise buring the working , more environmentally

 

With the function of auto-off wind, 15 minutes auto power off and adjustable fan. Banner Seam Welding Machine is a good companion for painting machine.

 

 Banner Seam Welding Machine may join disjunct advertising poster surface without mucilage.Know to all, the way to bond disjunct advertising poster surfaces, we usually use mucilage, such as the 502 glue to join them together in one, but the means have a lot of disadvantages, such as:

(1)Almost all of these kinds of bond are harmful on human health;

(2)When work, the operation is slow and is not too satisfied in strength with the glue, to get a good strength, usually we must proceed a special handling, such as whet the surface to make the surface not smoothed, so it may cost more workers;

(3)The air temperature may influence the stick strength, in low temperature environment, the bond effect maybe bad.

 

The Banner Welder Machine Without Mucilage, will be a more efficient companion for advertising material instead of the 502 glue.It can nicely solve the above existent problems, and may save more manpower and work field, for example, a PVC jointed painting with 200 meters long surface can be easily coalesced together and well matched, all the works can be well finished by a single person on only a heat-resistant and smooth base ground about 30 square meters.

 

The machine is designed self-moveable, the volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable; The HEAT JOINTER Machine, to join disjunct poster banner without mucilage which is constructed simple, easy to maintain, The volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable; the operation is also simple, and needs not much guide to operate.

 

When use  Banner Seam Welding Machine :

1) Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;

2) Turn on the  Banner Seam Welding Machine , prepare warm up about 2 minutes;

3) Bring up the machine, and place the roll at the end of the overlap edge;

4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.

Banner Seam Welding Machine  Application: laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.