TM-UV900 UV curing machine be given to dry uv color white black ... and lacquer high gloss and matte.

TM-UV900 UV drying machine Video:
/swydn/gamelogin?server_id=S57&from=dsp-0

Technical Parameters

sample picture

Only electronic power supplies can infinitely dim the lumen value.

when  product through,then lamp energy 100%

when  2 min no product through,then lamp energy 5% ，interval time

Brightness of lights when saving energy can set

Electric power lighting 5%~100%, traditional power 75% and 100%

However, ordinary transformers + capacitors cannot enter energy-saving mode, standard uv machine can only turn off the lights = 100% or 0%.

Frequent power outages have an impact on the life of the lamp, so it is not recommended to install camara at exit.

The normal life of the lamp is only 800~1200 hours

Even if it is changed to a variable-speed transformer, it is not stepless dimming. It can have up to three gear changes of 50%, 75%, and 100%.

Application
It is apply to the special effects such as wrinkle, frosted refraction gem crystal and convex oil on the bullion paperboard, metal, glass, plastic, and also the UV curing of the offset printing ink on the offset press production.

Features
1. With Teflon or stainless steel net, transmit speed steady and can be adjusted.
2. With two UV lighting tubes, can turn on the light according to the need.
3. Wink-dry make the surface of the stocks high hardness and rub resistance.
4. Tunneling-based make the whole machine light barrier good and without harm.
5. Equipped with powerful nether induced draughe system and big intake airway, can absorbs the stock on the mesh belthard. It can be used with production line and other equipment easily.

  FAQ: 
When machine in working have problem how to deal with it. Answer: Please sent us email first and tell us what the problem is. This is the standard machine, it's performance is very nice. 
Even have question those will be below question. you can check first by yourself
Q1, UV light can not light on. 
A1: Check the electricity have connect in to machine. The indicator of power will showed red light. Than operate as manual showed
Q2, UV light on, Belt stopped not run. 
A2: Turn on the lamp quickly and waiting for machine power off automatically. (Our machine have function Only need turn off light the machine will turn off automatically.) Than Check the Motor of conveyor which under the unloading side of belt. If this question replace a new one. Check the Speed control: Change a new one if the new one worked. We will shipment a extra speed controller Marched with the machine when we package in each shipment. 
Q3, The light twice again and gain than not light.
A3: Check your power supply is 220V +/_5% 50HZ, If Below 220V over the range of +/-5%, so keep your power supply steady. (our standard, any diffrent will be the machine we signed in purchase). 
Q4, The light can not dry completely to product ( UV ink, UV glue,UV varnish, UV coating and so on) 
A4: The lamp average lifetime is 800hours. if over this pls replace a new one. (We suggest when you purchase our UV machine, also purchase a new extra lamps as replacement) If a new lamp, than check the ignitor, transformer, and lamp they connect line is  well connected. Especially the lamp line. there is screw in, if it is loosen. pls stick it lightly. 
If find any parts need replacement , than within one year Guarantee we supply by free.
Also you can purchase a new one out of Guarantee.
We supply all parts of our machine. including: UV lamp, Transformer, Capacitor, Trigger, ignitor, reflector, Quartz, adapter, Phase protector, speed control, Speed motor, Exhausting fun, Air out tube ...... 

Welcome to contact us if any question.