Product Details

Angle Adjustable High Pressure Solar Panel solar keymark approved

1. Working Principle

Heat pipe series solar collector is always connected with existing heating supply device. The selective coating inside tubes converts solar energy into heat energy and transfers heat to heat pipe via aluminum feed. The liquid (anti-freezing liquid) in the heat pipe changes into vapor which rises to the condensers. This transference of heat in the liquid creates a continuous circulation as long as the collector is heated by the sun.

This model solar collector has a good advantage of multifunctional frame with different angels. It can adjust from up and down. It is one of the new type of headbox with fashionable design.It can be amounted on roof/flat foof/wall mounting in vertical position.
Headbox: 2.0mm aluminum alloy
Frame: 2.0mm aluminum alloy
Insulation: 50mm rock wool
Collector: with 14mm/20mm/24mm header heat pipe three target tubes
Manifold connection: 3/4'inch
Pressure bearing: 0.6MPa

Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	Loading quantity
Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	20'GP	40'GP	40'HG
JNSC-58-1800-10A	0.87	2020× 88 ×136	0.185	154	311	368
JNSC-58-1800-12A	1.04	2020×103 ×136	0.2	143	288	340
JNSC-58-1800-15A	1.30	2020×1268×136	0.234	122	246	291
JNSC-58-1800-18A	1.56	2020×1493×136	0.27	106	213	252
JNSC-58-1800-20A	1.73	2020×1643×136	0.3	95	192	227
JNSC-58-1800-24A	2.08	2020×1960×136	0.34	84	169	200
JNSC-58-1800-30A	2.6	2020×2380×136	0.423	67	136	161

1. Making Process:

1. Heat pipe three target tube

2. Red copper manifold:

3. Aluminum Frame:

2 Technical data:

Model	JNSC-15	JNSC-18	JNSC-20	JNSC-24
Construction	Evacuated tube solar collector
No. of collector pipes	15	18	20	24
Tube diameter(OD)	Outer tube: 58mm; Inner tube: 47mm
Panel area(m2)	2.5	2.95	3.24	3.84
Absorber surface(m2)	1.22	1.46	1.62	1.94
L×W×H(mm)	1975×1268×135	1975×1493×135	1975×1643×135	1975×1943×135
Weight(Kg)	48	57.6	64	76.8
Fluid content(L)	1.1	1.3	1.44	1.6
Angle of inclination	45^o
Max. temp °C	260^oC
Heat exchanger material	TU1
Permissible operating pressure	12 Bar
Test pressure	6 Bar
Manifold connection diameter	3/4''
Component material specification	Borosilicate glass/red copper/rockwool

3. Notice:

We can also offer brass fittings, copper pipes or stainless steel pipe and insulation pipe for connection.

OEM service is welcome.

We have a sound aftersale services. If there is any problems related to quality, we will replace it for you, anyhow this excluding force majour, or mankind causes.

When goods are sent by less than container, we will pack all vacuum tubes into wooden cases, see below: