Product Details

Evacuated Tube Solar Power Panels

JNSC-A

1. Working Principle

Heat pipe series solar collector is connected with existing heating supply device. The selective absorb layer on the inner tube is designed to convert solar energy into heat energy, and the heat is transferred to heat pipe via aluminum fin. Then, the anti-freezing liquid in the heat pipe will evaporate into vapor and rises to the condenser. The heat transfer circulation is formed in this way and it will continuously heat the water as long as the collector is heated by the sun.

2. Specification:

The JNSC-A heat pipe solar collector is scientifically designed, and the multifunctional frame can be fixed at different angles, and the frame can be adjusted from both up and bottom sides. This product is mounted on flat roof, inclined roof and vertical wall.

Headbox: 2.0mm aluminum alloy
Frame: 2.0mm aluminum alloy
Insulation: 50mm rock wool
Collector: with 14mm/20mm/24mm header heat pipe three target tubes
Manifold connection: 3/4'inch
Pressure bearing: 0.6MPa

Frame: 0-70 degrees

Lowest test temperature: -50 degrees

Our Product has a newly designed head box with fashionable appearance. In addition, the head box and frame are both made of 2.0mm aluminum alloy, and the insulation material is 50mm rock wool. Three target tubes are adopted and the collector has 14mm/24mm/24mm header heat pipe. Furthermore, the manifold connection size is 3/4’inch, and the 0.6MPa pressure is acceptable. we especially better to quality of heat pipe avoiding freezing crack used in some very cold area. And the working temperature range from -40°to 260°

A series heat pipe solar collector is the key part of a solar water heater, and it is used to absorb dispersive solar energy and then converts the solar energy into heat. It is a solar power panel with simple structure and moderate cost, and it can hear high pressure. Furthermore, the collector has big absorbed area, and it is an ideal product combining solar energy and architectural building. Seven models of the solar collector are available, and the specific parameters are different.

3. Technial and packing details :

Model	JNSC-15A	JNSC-18A	JNSC-20A	JNSC-24A	JNSC-30A
Construction	Heat pipe evacuated tube solar collector
Tube diameter(mm)	Outer tube: 58mm; Inner tube: 47mm
No. of collector pipes	15	18	20	24	30
Gross area(m2)	2.52	2.95	3.24	3.85	4.58
Aperture area	1.414	1.69	1.84	2.259	2.81
Absorber surface(m2)	1.303	1.56	1.73	2.08	2.6
L×W×H(mm)	2020×1268×136	2020×1493×136	2020×1643×136	2020×1960×136	2020×2380×136
Weight(Kg)	48	57.6	64	76.8	98
Fluid content(L)	1.1	1.3	1.44	1.6
Angle of inclination	0-70
Max. temperature °C	260^oC
Heat exchanger material	TU1
Max. operating pressure	12 Bar
Test pressure	6 Bar
Manifold connection diameter	3/4''

Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	Loading quantity
Model	Absorber area (m²)	L/W/H (mm)	Measurement(m3)	20'GP	40'GP	40'HG
JNSC-58-1800-10A	0.87	2020× 88 ×136	0.185	154	311	368
JNSC-58-1800-12A	1.04	2020×103 ×136	0.2	143	288	340
JNSC-58-1800-15A	1.30	2020×1268×136	0.234	122	246	291
JNSC-58-1800-18A	1.56	2020×1493×136	0.27	106	213	252
JNSC-58-1800-20A	1.73	2020×1643×136	0.3	95	192	227
JNSC-58-1800-24A	2.08	2020×1960×136	0.34	84	169	200
JNSC-58-1800-30A	2.6	2020×2380×136	0.423	67	136	161

5. Service:

We can also offer brass fittings, copper pipes or stainless steel pipe and insulation pipe for connection.

OEM service is welcome.

We have a sound aftersale services. If there is any problems related to quality, we will replace it for you, anyhow this excluding force majour, or mankind causes.

When goods are sent by less than container, we will pack all vacuum tubes into wooden cases, see below:

6. More details Shows:

As a China-based A series heat pipe solar collector manufacturer, we JINENG also offer pre-heated solar water heater, integrative pressurized solar system , solar water storage tank, heat pipe vacuum tube, and more.