120W LPV series LED constant voltage waterproof switching power supply
Negotiable /Piece
Min.Order:500 Pieces
Zhejiang Carspa New Energy Co., Ltd.
100W LPV series LED constant voltage waterproof switching power supply
35W LPV series LED constant voltage waterproof switching power supply
80W LPV series LED constant voltage waterproof switching power supply
20W LPV series LED constant voltage waterproof switching power supply
20W LPV series LED constant voltage waterproof switching power supply (LPV-20W)
12W LPV series LED constant voltage waterproof switching power supply
LED constant voltage waterproof switching power supply 120W
Features:
1. Constant voltage style power supply
2. 180~264VAC input range
3. Small volume, low weight, high efficiency
4. Protections: short circuit/over load/over voltage/over temp
5. Cooling by free air convection
6. Fully encapsulated with IP67 level
7. 100% full load burn-in test
8. 2Year warranty
Specifications:
Model | LPV-120-12 | LPV-120-24 | LPV-120-36 | |
OUTPUT | DC voltage | 12V | 24V | 36V |
Voltage tolerance | ±1% | ±1% | ±1% | |
Rated current | 10A | 5A | 3.3A | |
Current range | 0~10A | 0~5A | 0~3.3A | |
Rated power | 120W | 120W | 118.8W | |
Ripple & noise | 100mvp-p | 150mvp-p | 150mvp-p | |
INPUT | Voltage range | 180~264VAC, 255~373VDC | ||
Frequency | 47~63Hz | |||
AC current | 1.2A/230VAC | |||
Efficiency | 82% | 84% | 84% | |
Inrush current | Cold start current 40A/230VAC | |||
PROTECTION | Leakage current | <2.5mA/240VAC | ||
Over load | above 115%~150% rated output power | |||
Protection type: hiccup mode, auto-recovery after fault condition is removed | ||||
Over voltage | 15.6~17.8V | 30.6~33.2V | 42.6~44.2V | |
Protection type: hiccup mode, auto-recovery after fault condition is removed | ||||
Over temperature | when temperature of transistor inner node is over 150°C | |||
Protection mode: cutoff output, auto-recovery after temperature goes down | ||||
ENVIRONMENT | Working temp, humidity | -10°C~+60°C, 20%~90%RH | ||
Storage temp. humidity | -20°C~+85°C, 10%~95%RH non condensing | |||
SAFETY | Withstand vibration | 10~500Hz,2G 10min/1cycle, period for 60minutes, each axes | ||
Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
Isolated resistance | I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC | |||
FIT STANDARDS | Safety standard | Fit UL1012, IP67 protect level | ||
EMC standard | Fit EN55022, CLASSA | |||
OTHERS | Dimension | 215*69*43mm (L*W*H) | ||
Weight/packing | 1.1kg/20pcs/23kg/0.03 m³/1.07CUFT | |||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||
3. Tolerance: includes set up tolerance, line regulation and load regulation. |