Product Details

Features&Benefits:

-Thermal conductivity:1~5w/m.k

-Moderate tack on both sides

-High conformability to uneven surfaces at low stress application

-Electrical isolating

-Very cost effective

Configurations:

-Roll form,sheet form,die-cut parts

-Tape application available

Thickness available:

0.5mm-12.0mm,increment by 0.5mm

Typic Properties of Leader Thermal Conductive silicone pad series:

Typical Properties of Gap Pad Series
Property	Unite	LD8100C	LD8100+F100	LD8150	LD8200	LD8250	LD8300	Test method
Color	***	White Grey	Pink&White	Dark Grey	Dark Grey	Yellow	Blue	Visual
Thickness	mm	0.3-12.0	0.5-15.0	0.5-10.0	0.5-10.0	0.5-5.0	0.5-5.0	ASTM D374
Density	g/cc	1.8	2	2.5	2.8	3	2.7	ASTM D792
Hardness	Shore C	30±5	15±5	25±5	25±5	25±5	25±5	ASTM D2240
Tensile Strength	KN/m	0.85	2.5	0.47	0.33	0.42	0.29	ASTM D412
Continuous Use Temp	℃	-40~150℃	-40~150℃	-40~150℃	-40~150℃	-40~150℃	-40~150℃	EN 344
Electrical
Breakdown Voltage	Kv/mm	≥6.0	≥6.3	≥5.2	≥6.0	≥5.3	≥4.8	ASTM D149
Volume Resistivity	Ω.cm	1.2x1011	6.2x1015	8.0x1015	1.0x1016	3.2x1016	3.2x1016	ASTM D257
Flame Rating	V-0	V-0	V-0	V-0	V-0	V-0	V-0	UL 94
Thermal
Thermal conductivity	W/m.k	1	1	1.5	2	2.5	3	ASTM D5470
Remark: 1,Date for design engineer spec.Reference only.Engineers are remind to test the material in application. 2,The different thermal conductive pad have different application areas,any application solution question, welcome to contact Leader Team.

Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.

Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.

Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LD8100U,only one side has natural tacky.

Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.

Q:Will the heat make the thermal pads softer?
A: From -60-150,there is no significant change in the hardness of thermal pads, as gap filler.

Q: What’s the tolerance for the thickness?
A :Normally ±10%.

Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.

Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.

Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LD8100U has fiberglass on its surface, all other models will be made at your requirement.