Up to 1 and 2 hour fire rating.
Durable and decorative finish.
Fast drying time.
Green Label Product.
Bomba Approved.

Suitable for structural steel used as primer.[Apply directly to contour of primed I and H section columns, angles, channels and beams and hollow sections.

Various type of compatible primer.

It can be sealed and protected with a decorative water based top coat.

* Bomba Certificate [Malaysia Fire Department Approval] required to be apply by our brand specialist/applicator *

Theoritical Coverage

1mm WFT = 0.7mm DFT [Dry film Thickness] = 1 litre per SqM

1mm = 1000μm[microns]

Surface Burning

Flame spread 5, smoke development 35 when tested to ASTM E84.

Durometer Hardness

80 shore D when tested to ASTM D2240.

Initial Set

Approx 6 hours at 20'C and 50% RH for 0.4mm WFT.

Impact Resistance

18 kg/m when tested to ASTM D2794.

Fire Resistance

Structures protected with the coat have undergone fire resistance tests at approved independant laboratories to recognised standards throughout the world including:

- UK [BS476 : Part 21 : 1987]

- Canada and USA [ASTM E119 and ASTM E84]

- Australia [AS1530 : Part 4]

Assessed in accordance with ASFP "Fire protection for structural steel in buildings" procedures.

Storage

- Indoors in dry conditions between 10'C and 38'C.

- Protect from frost, excessive heat [above 45'C] and strong radiant sunlight.

Shelf Life

Maximum 10 months in original sealed containers.

Environmental

Do not discharge into drains, watercourses or soil.