Specifications

water Source Heat Pump
-High Efficiency and Energy Saving
-Operating Stability
-Advanced Technology

Water Source Heat Pump

The Ground Source Heat Pump is especially suitable for the building which has plenty of surplus heat, or the indoor area needs cooling and outdoor area needs heating. It is also suitable for the area where supplies adequate heat sources, like solar, river, lake and well water and terrestrial heat. It is also good for renovation of air conditioning for the old building.

Feature

-High Efficiency and Energy Saving: The air conditioner unit can automatically adjust the output energy based on the actual load in the room, leading to saving of energy and reduction of operation costs.
-Operating Stability: The temperature of water maintains relatively steady during all four seasons in a year,making operation of the unit to become much more reliable and stable,basically not affected by the surrounding environment and the natural climate.
-Advanced Technology: The unit provides not only air conditioning and heating, but also hot water for everyday life, making it really useful for multiple purposes.
-Split Operation: Control is made much easier and simpler by using the combination of wire controland remote control.

Modular Water Source/ground source Heat Pump Parameter
Model			H-30WR	H-40WR	H-50WR	H-70WR	H-90WR	H-110WR	H-150WR
Cooling Capacity		kW	30	40	50	70	90	110	150
Cooling Capacity		10³kcal/hr	25.8	34.4	43	60	78	95	129
Heating Capacity		kW	33.4	44.5	56.1	81.7	96.3	124.7	176
Heating Capacity		10³kcal/hr	28.7	38	48	70	83	107	151
Compressor	Type		Scroll Compressor
	Cooling Input Power	kW	4.8	6.5	8.5	12.5	13.7	19.9	26.6
	Heating Input Power	kW	6.8	9.1	11.5	16.7	19.5	26.7	35.7
	Quantity	Sets	2	2	2	2	4	3	4
	Power Supply		380V3~N/50Hz
Condense	Water Resistance	kPa	15	20	20	25	25	28	32
	Water Flow	m³/h	6.5	8.6	10.8	15.1	19.4	23.7	32.3
	Gap Spec	DN	32	40	50	50	50	65	65
Evaporator	Water Resistance	kPa	16	15	18	24	17	22	30
	Water Flow	m³/h	5.2	6.9	8.6	12	15.5	18.9	25.8
	Gap Spec	DN	32	40	50	50	50	65	65
Controller	Control Manner		Fully Automatic
Controller	Protection		High/low pressure protection, freezing-proof/over-heat protection(dual), safety valve, over load protection, open phase/reverse phase protection, under voltage/over voltage protection, water-break protection
Dimension	Length	mm	800	1250	1300	1550	1400	1380	1750
	Width	mm	600	750	750	750	1420	1150	1420
	Height	mm	720	1330	1360	1430	1360	1430	1430
Weight		kg	180	330	420	520	610	710	850
Operation Weight		kg	200	350	450	550	650	750	900
Note: 1) Unit cooling capacity is decided according to the following conditions: Chilled water inlet: 12ºC, cooling water inlet: 18ºC, cooling water: 29ºC, condenser water inlet: 15-30ºC 2) Unit heating capacity is decided according to the following conditions: Coldd water inlet: 15ºC, hot water inlet: 40ºC, hot water outlet: 45ºC, evaporator water inlet: 12-22ºC 3) Water side dirt coefficient: 0.086m²ºC/kW 4) Evaporator/condenser water side rated pressurer: 1.0Mpa 5) We can redesign for you if the above models can not reach your request.

HUIZHOU HICOOL CLIMATE EQUIPMENT CO., LTDis an emerging company that specializes in the design and manufacture of commercial/central air conditioning system. HICOOL, committed itself to commercial/central air conditioner researching, developing & designing since 2003, is strategically located in Huizhou, a city by the beautiful Pearl River in Guangdong Province, China. HICOOL operates out of a new 25,000 square meters factory which was designed to employ the latest efficiencies in manufacturing process.

HICOOL offers extensive range of commercial/central air conditioning system including non-refrigerant air conditioner, VRV system, high and low static duct unit, rooftop unit, air-cooled split type floor standing unit, small or modular air-cooled chiller, water / ground source heat pump, air source heat pump, swimming pool heat pump, air / water cooled screw chiller, air handling unit, fan coils, cassette type, etc. These products are well recognized domestically and internationally by our customers from East Europe, Middle East, South Africa, Oceania, North America and South America.
Customers benefit from HICOOL's state of art factory and product design utilizing cutting edge engineering technology. The company adheres to four key principles in the design and manufacture of its products namely: technology, efficiency, quality, and innovation. The company's specialized products meet its customer's needs by incorporating leading edge technology along with pursuing a quality policy of “reliability and safety, green and efficiency, innovation and technology, improvement and excellence”. The company's products demonstrate superior quality, elegant design, and extraordinary energy efficiency. Our factory possesses advanced production equipments and testing systems that are established to comply with the ISO9001 Quality Management System. All of the company's products are certified by CCC (China Compulsory Certification), CE & CB, while the leading products have MEPS (Oceania market), ETL (Northern American market), and some other certificates.

HICOOL provides its customer with custom design generated by computerized modeling and simulation. We partner with distinguished institutions and companies internationally to offer our customers free services in the design of air conditioning system, installation, training, and warranty.
High quality creates cool life. Our commitment to our customers, is to continue to add value through cutting edge technology, cost competitiveness, and sustainable growth.