Specifications

spray booth paint arrestor applied to paint booth
1)small resistance
2)large dust holding capacity
3)long service life

                                        spray booth paint arrestor

 

Speciality:

       Made of long fibreglass in non-woven way,large ventilation quantity,small resistance, good efficiency of the dust arrestance for the over-spray.

       It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system

       High strength fibreglass increasing structure;the windward side is green ,the leeward side is white..               

       The low compression performance maintains its outlook,which is completely useful for the filtration fibre to keep the oil mist and the dust

       Nonflammability, heat resistance 170

       The compression packing may save the fare and the storage space in the transportation.After decompression, it will regain its original condition

       Outer frame  may choose the paper frame , the galvanization iron frame,or aluminium alloy frame.

 

Using:

       Thick dust filtration for the general air-condition system.

       Applied to the dry spray painting platform and the exchaust gas system of the automobile spray paintting room.It is environment-friendly, reducing the pollution to the  environment

Model	PA-50/60	PA-100
Avg.arrestance(acc.EN779)	92%-96%	97%-99%
Initial pessure drop	15Pa	20Pa
Final pessure drop	250Pa	280Pa
Air velocity	0.7-1.75m/s	0.7-1.75m/s
Dust holding at tested final	3200-3600 g/	3600-4900g/
Temp.resistance,const	170	170
Temp.short peaks@X>	190	190
Normal thickness	50/60mm	100mm
Roll sizes standard	0.8*20  1.0*20   2.0*20	0.8*20  1.0*20   2.0*20

 

Remark:

  Wide variety of sizes and thickness

 

 

Specification: